"The biggest don't when it comes to toilet tanks is bleach—do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet. If you are aiming to remove tough stains from the tank, I also recommend white vinegar diluted with water."
If you want to really get your toilet tank clean, then you need to make sure you have the right cleaning products for the job. Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits.
Frequently asked questions. Can you put bleach in a toilet bowl? Yes, Clorox® Bleach is safe to add to the water in the toilet bowl. Always flush the toilet first before scrubbing, and then again when toilet cleaning is finished.
Cleaning your toilet tank is a very quick and easy procedure. We recommend using a mixture of ¼ cup of vinegar for every 1 cup of water.
Vinegar can be used inside the toilet tank too
"Without draining out the water, pour white vinegar into the tank, stopping at least an inch below the top rim," the site says. "Let the vinegar-water solution sit for 12 hours to dissolve mineral deposits, rust, and mildew."
Without regular deep-cleanings, you could face harmful bacteria, pink slime, buildup, rust, stubborn stains and even mold growth inside your toilet bowl. According to Amaro, a good rule of thumb for a high-traffic area like your bathroom (toilet included) is to clean it weekly.
Cleaning vinegar is a natural sanitiser with 6% acetic acid, which makes it 20 times stronger than white vinegar. Like bleach, it can fight grime, kill bacteria and remove mould. It also works great for descaling the toilet and is even a better product than bleach.
Because water deposits build up under a toilet's rim, it can take only 24-48 hours for colonies to start breeding. As it grows, you will see what looks like black debris or rings inside the bowl. This can cause respiratory problems for people as the mold and mildew release tiny spores into the air.
Once a week at least.
Tetro says your bathroom is the ultimate bacteria host; E. coli can be found within six feet of the toilet and in the sink. To keep it at bay, disinfect the toilet and sink at least once weekly, and the bathtub every two weeks — more if you shower often.
Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.
While it might seem like it's chewing its way through grime, it's not powerful enough to damage the porcelain finish of the toilet bowl. Pour two cups of white vinegar around the edges of the toilet bowl, allowing it to swirl around and settle in the bottom.
Vinegar is great for a lot of things, and one of those includes replacing your bleach. It can disinfect, brighten your clothing and even help remove soap residue. It's around 80% effective against viruses and mold bacteria, which makes it a great choice for a natural disinfectant.
Can you clean with vinegar and bleach? You should never clean with these two ingredients combined. Mixing chlorine bleach, which contains sodium hypochlorite, with any type of acid like vinegar creates chlorine gas, a dangerous chemical that's deadly in high volumes.
The corrosive properties of the bleach can wear away at the internal parts of your toilet, such as rubber seals, and cause leaks or other potentially permanent damage.
Simply measure out half a cup's worth of bleach and pour it into your toilet bowl, using your toilet brush to scrub it into the bowl and beneath the bowl's rim, also allowing five minutes to pass before you flush it all away.
If instructions are not available, leave the diluted bleach solution on the surface for at least 1 minute before removing or wiping. This is known as the “contact time” for disinfection. The surface should remain visibly wet during the contact time. Wash hands after cleaning or disinfecting.
If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.
Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.