The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
The water moving around helps protect the chlorine from being burnt out from the sun. If you run your pump during the night, then the sun has all day to attack the chlorine that's standing still in your pool. That can cause algae fast! It's a great idea to have the pump running when people are using the pool.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
Chemicals that you add to your pool while the water is circulating don't need to be recirculated; they will stay mixed even if you don't pump the water continually. Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
You cannot run your pool pump every other day because the standing water can pose a health risk as it can quickly accumulate bacteria and fungi. It is crucial to run the pump every day for 8 hours (in one or multiple sessions), so the entirety of the pool's contents run through the filter once.
If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.
For energy efficiency best time to run the pool's filtration system is during off-peak hours when the electricity demand is lower. This time is typically between 8 p.m. - 10 a.m. Also, to warm the pool you can run it during the day, to cool it at night.
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
If a parent chooses not to use chemicals in the kiddie pool, the water must be drained after the children are done using it. This should occur within 24 hours. That means the parents must go through the hassle of filling the pool with fresh water each day.
The best time to heat your pool is during the day at least several hours before you plan on using it. The risk of running your pool pump overnight is that the outdoor temperature might be too low for the pump to efficiently warm your swimming pool.
So how long should the average pool pump run during the summer? To make this process simple, it easier for homeowners to follow this basic guideline: for every 10 degrees of outdoor temperature run your pump for one hour. So if the average temperature is 60 degrees, run your pump for 6 hours.
Even if you have your pool covered, some debris may still get in it during the winter. For this reason, you should consider running your pump on occasion whenever the outdoor temperature is between 35 and 65 degrees. Around four to six hours should be sufficient to remove debris and help promote good circulation.
You should cover your pool every night for several reasons. First off, a pool cover saves energy and conserves water by decreasing the amount of make-up water. Also, it reduces the consumption of chemicals, and finally, it saves a lot of cleaning time since it keeps the debris out of the pool.
We recommend that our customers run their pumps rain or shine UNLESS we have an electrical storm. In that case, lightning could strike an outside circuit, which could damage your pump and other equipment. If you're worried about lightening, turn the pump off or shut off the breaker.
Rainfall dilutes pool chemistry levels and lowers the readings for pH, alkalinity, hardness, stabilizer, and chlorine. Rainfall does not contain chlorine. As well, rainfall brings with it small amounts of contaminants that are washed into the pool.
One very important rule to remember: Just because pool water is clear doesn't mean it is sanitary or in proper chemical balance. Depending on the size of your pool, we still recommend the pump run 8-10 hours per day during the hottest summer months and at least 6 hours per day during the winter months.
Low flow = poor circulation which will lead to algae in the pool. Bottom line, the filter must be backwashed on a regular basis to ensure that your pool water is clear. "When do we need to backwash?" - It is recommended to backwash your filter once every 4-6 weeks of regular use.
Keep the pump and filter on while you are away.
Set it before you leave to ensure the pool filter system will run at least 8 to 12 hours per day.
You can run the pump every day, but if it's too dirty, the circulation, pressure and efficiency will suffer. Most Intex filter pumps operate with a cartridge-based filter. Remove the cartridge and hose it free of dirt and debris, then reinsert it.