The standard size for a kitchen sink can vary, but a typical size for a single-bowl sink is around 30 to 33 inches in width and 20 to 22 inches in depth. Double-bowl sinks can range from 30 to 48 inches in width, depending on the bowl size and configuration.
Most styles of sink work in small kitchens, as long as the sink is roughly between 22 and 24 inches. Anything more than 27 inches runs the risk of being too big and overpowering your kitchen, as well as taking up valuable counter space. As you have less space, a single bowl sink may be the better option.
In general, the standard sink size is 22” x 30”. While single bowl sinks can have a width upto 36 inches, double bowl sinks can go upto 48 inches.
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
Standard-sized kitchen sinks measure 22 inches by 30 inches.
While the front-to-back measurement of the sink typically remains the same (roughly 22 inches) due to the size of most cabinets, the length of various kitchen sinks can vary immensely.
If you frequently use large pans or baking trays, it might be worth getting a sink with an extra wide or extra deep bowl – or even a 1½ / double bowl. If you don't have a dishwasher in your kitchen, make sure you get a sink with a built-in drainer, so you have enough space to let items dry after you hand wash them.
A 33" cabinet will only fit a 30" sink.
TIP: Standard cabinet sizes are in 3” increments. I.E.: 27”, 30”, 33”, 36”, etc. In general your sink should be at least 2-3” smaller than your cabinet size. For example, a 36” sink base cabinet can easily fit a 33” sink.
A typical 33 x 22-inch sink will fill a 36-inch base cabinet. If you're replacing a sink, make sure it fits the existing cutout. If the cabinet allows, you may be able to install a larger sink by expanding the cutout. A farmhouse sink may require a special cabinet size.
What size farmhouse sink should I get for a 36" cabinet? The recommended size for a 36" base cabinet is a 33" farmhouse sink or smaller. It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
Pros: Many homeowners consider a curved sink easier to clean than one with square edges. Cons: If a sleek, minimalist look is your kitchen style, this might not be the look you're after.
Most round bathroom sink bowls are 16 to 20 inches in diameter, while most rectangular sinks are 19 to 24 inches wide and 16 to 23 inches front to back. The typical basin depth is 5 to 8 inches.
Single-bowl sinks are generally larger than double-bowl sinks, which can make them more convenient for tasks such as washing large pots and pans. They also offer more uninterrupted space for items such as a drying rack or cutting board. Single-bowl sinks are often less expensive than double-bowl sinks.
OVERHANG - The countertop extends over the edge of the sink on all sides by approximately 1/8" - 1/4". Use caution with this installation to be sure that accessories such as colanders or cutting boards will fit properly. REVEAL - The countertop edge sits approximately 1/8" - 1/4" back from the edgeof the sink rim.
Size of the Faucet
On the other hand, if the faucet is too big, then you may end up splashing yourself every time you wash your hands or rinse the dishes. Not to mention, the faucet will overpower the sink.
Most Popular By Configuration. Single basin, apron/farmhouse, workstation, and double basin kitchen sinks are the most popular sink styles for the upcoming years.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
Wondering why you can't fit a 36” sink in a 36” cabinet? That's because of how the sink attaches to the counter! Every undermount sink has a bit of a lip that gets siliconed to the underside of the counter – reinforced with metal clips. That lip and those clips take up an inch or two (and vary from sink to sink)!
Standard sink base cabinet widths
Standard sink base cabinet dimensions range from 30 to 42 inches wide. 30 inches is the standard single basin sink base width. 33 inches is the typical double-basin, offset sink cabinet size.
The most common sizes for a kitchen sink are 30" or 33", however a standard size could measure anywhere between 24" and 36" in length. Generally, sinks up to 30" will contain one large single bowl.
Some sinks will be labeled 30" Kitchen sink, but the basin size is in fact 28". [This sink will fit!] While other sinks are named after their TRUE 30" basin size [This will NOT fit]. Which means you CAN fit some "thirty" inch sinks in a 30" kitchen sink base cabinet.
30 inches- Used for single basin sinks. 33 inches- Used for offset sinks, or double basin sinks. 36 inches- Used for double basin sinks. 42 inches- This is the largest width in a base cabinet.
Standard sink base cabinets are 24″ deep (back to front), and most sinks are designed to fit that size. However, widths vary widely and sink widths vary accordingly. All you need is the cabinet in question and a tape measure!
Kitchen Cabinet Kings
General rule of thumb is actual sink should be 3" in actual width less than the sink base for smooth fit. However if you notch the sides of the cabinet, you should be able to get something as tight as 1.5 less than cabinet to fit.