You have to know its capabilities, 1600 PSI is good for most home jobs (general siding cleaning/gutters, car washes, cleaning furniture) Don't expect it to clean a whole concrete driveway in one smooth pass.
This 1600 psi 1.2 GPM electric pressure washer, as explained earlier, generates 1,600 Pounds Per Square Inch (which is in the recommended pressure range), and 1.2 Gallons Per Minute (ideal for washing cars, house exteriors, fences, garage floors, etc…).
Concrete and asphalt require more cleaning power. You'll want to use the turbo nozzle on the 1600 PSI for hard-to-clean driveways, sidewalks, and patios as well as brick paving. For wood decks and painted surfaces, switch to the gentler 40-degree nozzle.
For cleaning a wooden deck, you'll be best served by using the lowest pressure setting that's still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi.
Vinyl siding can withstand a powerful gas pressure washer (2,500-3,000 psi). Aluminum, stucco or soft-grain wood homes will do better with a less powerful washer (about 1,200-1,500 psi).
Select the Correct Pressure Washer
This means you want to rent a pressure washer that meets such needs. To correctly strip old paint, you should work with a power washer with a psi of 2000 or higher.
Concrete cleaning calls for powerful pressure washers featuring high pressure levels of 3000 PSI. However, if you will be using the power cleaner to maintain a range of surfaces in addition to concrete, choose one with adjustable pressure levels and set it to about 3000 PSI when you need to clean concrete.
If you need to clean a two-story house, you'll need a heavy-duty or extra heavy-duty pressure washer. This will give you a water pressure of 2,800 PSI (Pounds Per Square Inch) or higher and three to four GPM (gallons per minute) of water.
If you want to clean your driveway quickly and efficiently, use a pressure washer of at least 3100 PSI. Using pressure washers with pressures ranging from 1000 to 2300 PSI will also help you clean your driveway, but it will take a long time.
Most electric pressure washers create 1300-1700 pounds per square inch of pressure (PSI) with a water flow of 1.5 gallons per minute (GPM), but experienced contractors recommend between 2000 and 3000 PSI and a flow of at least 2.5 GPM to clean dirty concrete effectively. …
For most cars, a psi between 1200 and 2200 is recommended. This range provides enough cleaning power to remove dirt and grime without damaging the car's paint or delicate surfaces.
1000 to 1500 psi pressure is easy to mange and will not cause damage to pavers and paving stone. A low pressure washer is also safe for mortared flagstone and slate patios and walls.
Medium Duty 2000-2800 PSI
This classification ranges from as low as 2,000 PSI to as high as 2,800 PSI. You can use a medium-duty pressure washer for almost any surface. They're great for cleaning concrete, brick, and wood.
LIGHT-DUTY pressure washers in the 1,300 to 1,700 PSI range are great for cleaning patio furniture, lawn equipment, stairs, and vehicles such as automobiles and small SUV's.
PSI Pressure range for Different Surfaces
Different surfaces require different levels of PSI pressure. Generally, for most residential uses, an electric pressure washer (less than 2000 PSI) will suffice. Soft surfaces, such as decks and siding, usually require more cleaning power than harder surfaces such as driveways.
Most people believe that concrete is solid and almost invincible. However, using a pressure washer with the incorrect tip or using too much pressure or a combination of the two can etch concrete.
However, in general, a psi of 3000-4000 is commonly used for residential driveways.
Applying a degreaser will loosen stains in the concrete, allowing you to pressure wash them away. Some pressure washers have an attachment tool for applying degreaser. Otherwise, scrub the degreaser into the concrete with a stiff-bristled brush or push broom.
Every home is unique, from its square footage to the materials it's made from, making it difficult to give an exact estimate. For example, a 2,000 square foot home can take anywhere from one to three hours to power wash.
You are doing a full cleaning of the siding on your house and are estimating that you will need right around 4 hours to get the entire job done. This means you will be using something like 420 gallons of water to complete your pressure washing job (1.75 gallons x 60 minutes/hr = 105 gallons/hr x 4 hours = 420 gallons).
To clean concrete, exterior siding or an asphalt driveway, you'll want at least 2,000 to 2,800 psi and 2 to 3 gpm (4,000 to 8,400 ECUs).
Domestic vs Industrial or Professional Pressure Cleaner
If your pressure cleaner only goes up to 1500 psi at maximum, you can still clean your driveway. However, take note that it may take a little longer and more effort, and there may be some dirt and stains it will not get out.
For instance, a light layer of dirt or dust may only require a PSI of 1,500 to 2,000, while a thick layer of oil or grease may require a PSI of 3,500 or higher to remove.
Most electric pressure washers create 1300-1700 pounds per square inch of pressure (PSI) with a water flow of 1.5 gallons per minute (GPM), but experienced contractors recommend between 2000 and 3000 PSI and a flow of at least 2.5 GPM to clean dirty concrete effectively.