Insert your screwdriver into the hole and push forward. If your doorknob is using a push-button type privacy lock, then you should hear a loud click and the door will open. If the door doesn't unlock from pushing then you are likely dealing with a turn-style lock.
One of the best-known ways to unlock a deadbolt without a key is by using two bobby pins. Start by inserting the closed "looped" side of one bobby pin into the bottom portion of the lock. Use the second bobby pin, broken in half, toward the top of the lock and move it back and forth.
To pick a lock with a screwdriver, you need a flat head screwdriver. Insert it at the bottom part of the keyhole. Once it is placed inside the keyhole, turn it clockwise. Apply the right amount of pressure while the screwdriver is in the position.
Unfortunately, you can not unlock a deadbolt with a credit card. Credit cards will only work with slanted-latch-style locks. Furthermore, the slant of the latch must be facing you so that you may press it in using your card.
Picking a Locked Bathroom or Bedroom Door Lock
Most interior locksets have a pinhole on the outside knob for emergencies. All you need to pick one of these locks is a single straightened-out paper clip to substitute for the pinhole door knob key. Insert the paper clip into the pinhole and push on it to unlock the door.
Spray the lubricant inside the deadbolt and around the outer edge of the key hole, and place the tip of the drill bit onto the center of the key hole. Pull the trigger on the power drill to spin the drill bit. Gently apply pressure onto the drill to force the drill bit into the key hole.
Ideal choices include a small screwdriver or hex wrench, a hair pin, or a heavy-duty paperclip. You can even use a bamboo skewer from the kitchen, or a cotton swab with the fluff removed from one end. If using a hair pin or paper clip, first bend it open so you have a long, straight bit of metal.
Picking a lock with paper clips works pretty much the same way as picking a lock with a traditional tension wrench and rake. You just need to turn two paper clips into those two very same tools, and then pick the lock with them like you'd normally do.
You can pick any keyed deadbolt lock with two basic tools. The first is the pick itself, which is a long, rigid piece of metal or plastic that fits easily into the keyhole and won't bend easily when you push it against something.
Generally speaking, deadbolts are sturdy locks that can withstand kick in and other forced entry attempts. However, a door with a deadbolt can still be kicked down if the door itself is not solid. So, to protect your door against kick in, you want to make sure both the lock and door are of high-quality grade.
Wiggle and twist the pin in the lock. You are trying to push up the pins to the shear line in the lock. Try to feel for them as you wiggle up and down and twist around. Be patient with this process and concentrate on the task at hand.
When executed correctly, lock bumping is effective in nearly 90 percent of all cylinder-type locks produced today. Perhaps one of the most disconcerting aspects of lock bumping is that it can often go undetected, which means that your home can be broken into without any signs of forced entry.
Insert a pair of scissors into the hole of the lock as deeply as you can. The blades should be thin enough to fit into the whole of the lock. ... Turn the scissors counter clock wise, from left to right, once the scissors are deeply inserted into the lock. Shift and move the scissors around until the lock is opened.
Lock-drilling is a last-resort approach to gaining entry to locks that cannot be opened by other means. Drilling a lock will destroy the locking plug, but should leave the mechanism in working order.
Cobalt drill bits are used for drilling hard metal and steel. They dissipate heat quickly and are highly resistant to abrasions, making them better for drilling into hard metals than black oxide- or titanium-coated drill bits.
One of the easiest ways to break a padlock is with a hammer. Start by inserting 2 fingers into the padlock's shackle loop and pull up on the shackle to create tension. Then, tap the side of the lock that contains the fixed end of the shackle with a hammer using quick, short strikes.