What is the standard size for a kitchen sink? The standard size for a kitchen sink can vary, but a typical size for a single-bowl sink is around 30 to 33 inches in width and 20 to 22 inches in depth. Double-bowl sinks can range from 30 to 48 inches in width, depending on the bowl size and configuration.
The standard sink size is about 22 inches long to 30 inches wide, but once again it's crucial to take proper measurements. If you're replacing a drop-in sink with rims, start measuring from the outer lip of the sink, not the basin itself. If you have an undermount sink, start measuring where the edge meets the counter.
The most common sizes for a kitchen sink are 30" or 33", however a standard size could measure anywhere between 24" and 36" in length.
As a small kitchen sink size, 22-inch sinks can be perfect for compact kitchens or as secondary sinks in larger kitchens. Small sinks are also great kitchen nook ideas. If you have limited counter space, these can be mounted under the counter or in a corner.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
Some sinks will be labeled 30" Kitchen sink, but the basin size is in fact 28". [This sink will fit!] While other sinks are named after their TRUE 30" basin size [This will NOT fit]. Which means you CAN fit some "thirty" inch sinks in a 30" kitchen sink base cabinet.
Base cabinet size
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
Standard sink base cabinet dimensions range from 30 to 42 inches wide. 30 inches is the standard single basin sink base width. 33 inches is the typical double-basin, offset sink cabinet size. 36 inches is the standard double-basin sink cabinet dimension.
Most styles of sink work in small kitchens, as long as the sink is roughly between 22 and 24 inches. Anything more than 27 inches runs the risk of being too big and overpowering your kitchen, as well as taking up valuable counter space. As you have less space, a single bowl sink may be the better option.
Buttrick recommends a sink that is at least 27 inches long, 19 inches wide, and 7.25 inches deep. “Once you factor in the three-quarter-inch counter depth, the sink is eight inches deep,” he says. Similar-size models are also available commercially.
Although for tiny kitchens, experts recommend a length of at least 56 to 69 centimetres. In terms of depth, kitchen sinks should be at least 17.8 to 18.4 centimetres deep – if they aren't, your dishes will pile up quickly and reach the faucet – 20.3 centimetres and up would be ideal for heavy dish loads.
If you frequently use large pans or baking trays, it might be worth getting a sink with an extra wide or extra deep bowl – or even a 1½ / double bowl. If you don't have a dishwasher in your kitchen, make sure you get a sink with a built-in drainer, so you have enough space to let items dry after you hand wash them.
You need a 36" cabinet. A 33" cabinet will only fit a 30" sink.
Kitchen Cabinet Kings
General rule of thumb is actual sink should be 3" in actual width less than the sink base for smooth fit. However if you notch the sides of the cabinet, you should be able to get something as tight as 1.5 less than cabinet to fit.
Its used for draining off water from hot pots when there's dirty plates in the other, washing hands, rinsing off plates etc when washing up.. Storing washing up bottle and sponge lol the list goes on!
Standard Kitchen Sink Sizes to Know
On average, customers who purchase single-bowl sinks prefer 30-inch-long dimensions at most. Experts recommend at least 22 to 27-inches in length, which also works for small kitchens.
Dawn 22" Undermount Stainless Steel Kitchen Sink
This little gem measures overall at a little less than 22" left to right. This allows this sink to very easily fit in a 24" sink base cabinet.
The reason for this is to allow for adequate room to work when installing the sink, as well as to avoid potential water damage or mold growth in the cabinetry. The minimum cabinet size needed for your sink will be found on the product page from our website once you search the model like the example shown below.
In general, the standard sink size is 22” x 30”. While single bowl sinks can have a width upto 36 inches, double bowl sinks can go upto 48 inches. The other thing that you need to consider is the depth of the sink. Sinks can have a depth between 6 and 12 inches.
A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten. If you eliminate the clips, you eliminate the need for access.
Never Place a Full-Height Cabinet Above the Sink
We strongly recommend that a full-height IKEA cabinet above the sink must have an open space that's at least 12”(H) and 30”(W). The reasons why are two-fold. First, it's pretty awful to work over a sink with a full cabinet inches away from your face.
7) Space Above Kitchen Cabinets
There are no municipal codes that prescribe an upper cabinet height. However, the average among many kitchen interior designers is 54 inches from the floor to the bottom corner of the cabinet, leaving a space of 18 inches between the countertops and the upper cabinets.
Base cabinets are usually shorter than sink base cabinets, and they don't have a built-in sink. Sink base cabinets, on the other hand, are designed to accommodate a kitchen sink. They're also often deeper than base cabinets, giving you more storage space for larger items.