What is under laminate cabinets? Laminate cabinets tend to be made from cheap or pressed woods underneath their laminate film exterior. These cabinets are usually made from MDF or particleboard which is then covered with the laminate coating.
MDF forms a solid core underneath the laminate, and it's a better substrate for painting than particleboard, which is a loose conglomeration of wood chips that are likely to separate and crumble when you pull off the laminate.
With a hair dryer on the lowest heat setting, blow hot air across the edge of the laminate and continue across the entire cabinet in a sweeping motion. Within seconds, you should be able to get your fingertips under the edge of the laminate and start peeling it away, as Ray Hayden demonstrates.
Sometimes called floor or lower cabinets, base cabinets are the lower section of cabinetry that is installed on the floor.
Good-quality wood glue and a clamp to hold the laminate against the core is a good way to repair laminate coating that is peeling. Once the glue has set and dried, you can begin to clean the cabinet doors and drawers.
Depending on the damage, you can either fix the existing laminate or reface the door to fix the problem without installing entirely new units. As a general rule, if there are any cracks in the laminate, the entire piece needs to be replaced; however, if there's only peeling, you can reattach the laminate with adhesive.
With laminate or wood veneers laid over the existing cabinet boxes, you can change the style, color, wood type—even the associated historical era.
Toekick – The recessed toe space at the bottom of a base cabinet.
Door reveal refers to the portion of a cabinet frame left exposed after the door is attached. The size of your reveal is determined by the size of your doors in relation to your cabinet case frame.
A stile is a piece of wood that is aligned vertically in a cabinet's frame. Stiles and rails, which are horizontal pieces, are combined to create a complete cabinet frame. A stile may also refer to the vertical piece of wood that is placed in the opening of a cabinet.
Laminate Cabinets
This process leaves a completely smooth surface that does not show any seams. The lack of seams around the door's joints can be a clear indication that your cabinet doors are a laminate material.
You can sand, prime and paint laminate as if it were a solid wood piece of furniture! It's easy to skip the sanding step, because sanding is a drag… but it's especially important with laminate. Because it's often somewhat glossy-looking, and important to sand it down until the finish is very dull before priming.
The least expensive option is painting laminate cabinets. Laminate is not an ideal surface to paint, but it can be done.
A sure way to recognize wood laminate is when the grain does NOT follow through your piece. Wood Veneer is a sheet or thin layer of 'quality-natural-hardwood' that is adhered to a lesser quality wood surface.
Laminate cabinets are generally significantly less expensive than wood cabinets, making them an attractive option for those looking for a contemporary style and operating on a budget.
Laminate cabinets are more affordable than traditional wood cabinetry, and they are very easy to maintain. They are also less vulnerable to heavy wear and tear, making them an ideal option for young families.
Frameless A more contemporary cabinet design, frameless cabinets are the European way of manufacturing cabinets that has become increasing popular in the American kitchen. The concept is simple - the face frame is eliminated and just the box remains.
The term flush-overlay as used in cabinetry can refer either to the doors or to the drawers. The term describes the way in which the doors and drawers get fitted together with the functional hardware elements and the frame of the cabinet, as described at the Remodeling 101 and the Perfection Cabinetry websites.
Cabinet overlay means the correlation of your cabinet doors to the cabinet face frames. This overlay affects how much of the cabinet frame shows and can change the appearance of your space from traditional to a contemporary-style kitchen.
The cabinet does not have a back panel, which allows plenty of room for access to the plumbing. Sink base cabinets also do not have drawers, which interfere with the water lines, waste traps and any other pipes that are under the sink.
Base Cabinet Depth
Stock base cabinets are generally 24 inches deep (not counting countertop overhang). Deeper base cabinets make it difficult for you to reach the back of the counter or to plug-in appliances.
Base Cabinet
A cabinet that sits on the floor. These cabinets usually support the countertops. They differ from wall cabinets which hang on the wall. Base cabinets are typically 24" deep, and vary by width.
Laminate costs an average of $91 per linear foot or $1,000 to $3,000 total. High-quality veneer costs an average of $193 per linear foot or $2,500 to $6,500 total. Real wood veneer costs an average of $454 per linear foot or $6,000 to $14,000 total.
Q: Can I install plastic laminate over a countertop that's already covered with existing laminate material? A: Yes, but the existing surface must be even and smooth. Repair any gouges or loose edges and make sure the existing laminate is glued firmly.
What Does Refacing Cost? A professional cabinet refacing for a typical 10-foot-by-12-foot kitchen starts at around $80 to $100 per linear foot for laminate materials only. Expect to pay the same, $80 to $100 per linear foot, for wood veneer materials.