Baking Soda and Vinegar – Try a safe chemical reaction. Measure one cup of baking soda and pour it into the toilet bowl. Then, slowly pour in one cup of vinegar. The fizz may help to break up the clog before you even have to plunge.
Hot Water: Boil a pot of water and carefully pour it into the toilet from waist height. The heat can help soften the blockage. Be cautious not to splash. Plunger: Use a toilet plunger. Make sure you have a good seal around the drain and plunge vigorously. The pressure can help dislodge the clog.
Combine baking soda and vinegar in the toilet bowl. Pour one cup of baking soda followed by one cup of vinegar. Wait for the fizzing to reduce, then add hot water. Wait for an hour or overnight before flushing.
Take a bucket and fill the toilet bowl with water , as high in the bowl,as you can with out going over the edge. The weight of the water will uasally unclog the toilet, take a plunger and plunge it a bit with the bowl full of water it will 99% of the time work like a charm .
One of the strongest substances for unclogging a toilet is a commercial drain cleaner specifically designed for toilet clogs. These cleaners typically contain powerful chemicals that dissolve organic matter and stubborn blockages.
Baking Soda And Vinegar
Instead of creating a volcano, this vinegar and baking soda mixture will work together to loosen up the clog in almost no time. We suggest wearing rubber gloves for this. As this method creates a pretty chemical reaction, it is recommended that you use it in a toilet bowl that is not too full.
While it is okay to pour boiling water down sink drains, you should never use boiling water in your toilet, as the heat can cause the porcelain to crack. Instead, run your tub until the water is hot and fill a good-sized stockpot or bucket with it. Then, pour the hot water into the toilet bowl from about waist height.
Substances like toilet paper and fecal matter will eventually dissolve within the toilet drain and clear the clog organically. However, blockages made from insoluble materials won't resolve on their own and typically require you to fix the clog manually or contact a professional before they worsen.
Pour ½ a cup of dish soap into your toilet bowl, if possible add a gallon of hot (but not boiling) water as well to help activate the clog-busting ingredients in the dish soap. Wait 20 minutes and then try out a test flush. You might need to scoop some of the water out with a cup or bowl to accommodate the hot water.
Make your own drain cleaner by pouring one cup of baking soda and two cups of vinegar into the toilet and adding a half gallon of hot water. Dish soap can also help loosen some obstructions. When using either method, allow the solution to sit overnight and then flush the toilet to see if the obstruction has cleared.
You can make your plunger more effective by running it under a hot tap first to soften the rubber. Start with a gentle action to avoid pushing the blockage further down. Push gently downwards then pull up. Gradually increase the force with which you push and pull until the water starts to recede.
Plunge the Water
Shut off the water supply valve. Place the flange of a toilet plunger firmly into the drain hole in the bottom of the toilet bowl. Plunge with an up-and-down motion to remove most water from the bowl. This should also force out any clog.
The Passive Solution
By pouring a caustic soda (coke, for example) into the toilet bowl, you can speed the dissolving process along considerably. Simply dump a can of cola in the water and let it eat away at the debris. Just be sure never to flush the toilet when the water level is already high.
This is called the “gravity flush,” and all you need to do is quickly pour about 1.6 gallons of water into your toilet bowl. The gravity flush creates enough pressure to push whatever is in the bowl down, and you don't need to push the toilet handle to flush.
Clogged drains
A clogged drain is one of the most common causes of a toilet filling up with water. Anything big enough to obstruct your drain can prevent water from flowing freely. This causes the water to come back up the toilet bowl when flushed.