Because salt does not dissipate from your water, the only time you would add salt to your pool is when you add fresh water or after heavy rain that dilutes salinity levels. An example of when you would add fresh water is after a heavy backwashing cycle. pool, or use a home saltwater test kit.
Annual booster additions of pool salt are usually required, but only to replace salt lost from backwashing, splashout or lowering the water for winter. If you fully drain the pool for maintenance, you will need to replace all of the pool salt.
While the average salt cells used in a residential salt water pool will last around 10,000 hours of operation, or around three to five years, there are things you can do to ensure it lasts as long as possible.
Salt is usually needed due to loss because of backwashing the filter, bathing suit drag out, water splash out, leaks, or rainwater overflow.
During the winter months the amount of chlorine needed to keep a pool clean is substantially reduced due to the fact that bacteria doesn't grow in cold temperatures (around 50 degrees Fahrenheit or so). The salt cell is programmed so that it recognizes the temperature drop and makes the decision to shut itself off.
The overall cost of salt for a saltwater pool will vary by the type of salt that you use and the size of your pool, but you can expect to pay on average between $10 and $25 per every 40 pounds of salt (or 25¢ to 63¢ per pound of salt). Some brands may even sell a 40-pound bag of pool salt for as much as $40.
Pros of Saltwater Pools
There's less chlorine and less of the heavy chemical scent and content. They're gentler on the skin, with less irritation to the eyes, hair and swimsuits. The water has a softer, silkier feel to it compared to chlorine water. They have lower maintenance costs than chlorine pools.
Overall, you need to run your saltwater generator and pool pump for at least 8 hours daily. Not running either of these long enough means not enough chlorine to sanitize the water. Remember, the pool pump needs to be running simultaneously with the chlorine generator for the salt cell to produce chlorine.
Bottom Line. A little bit of extra salt in your pool doesn't generally result in any concerning issues. However, putting in excessive amounts of salt, resulting in salt levels 5000 ppm or more, can lead to corrosion of your metal pool equipment. Not to mention, having too much salt will also make the pool saltier.
So, not only is shocking a saltwater pool okay, but it's actually important to your pool's health. Shocking is the process in which you overload your pool with chlorine (3-5 times the normal amount) to improve your pool's cleanliness and kill off organic matter.
Just like a chlorine-based pool, saltwater pools turn cloudy when chemicals are not balanced. You need to ensure that all chemicals are balanced all the time to avoid cloudy water and growth of algae. The major causes of cloudiness are chlorine, pH, Salinity, total alkalinity, cyanuric acid, and calcium hardness.
I have the same one and yes it takes about 24 hours to register salt.
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
No — you can't get pregnant from sperm in a swimming pool. Sperm can live outside the body for a short time under the right conditions, but those conditions aren't found in water.
Yes, a salt water pool has a reduced cost of operation as compared to a traditional chlorinated pool. This cost savings is primarily because chlorine is generated from salt and there is no need to buy chlorine. Additionally, salt water pools require fewer chemicals to keep the water clean and clear.
While they do cost a bit more on the front end than a chlorine set up, the ongoing maintenance for saltwater pools is typically far less expensive. Generally, you can expect to pay somewhere around $300 to $800 a year on the chemicals you'll need to maintain a chlorine pool.
This start-up investment may be recouped in a few years with less expensive day-to-day chemical needs. A saltwater pool requires less than $100 a year in salt and chemicals if it is consistently maintained. A chlorine pool, on the other hand, will cost between $300 and $800 per year in maintenance chemicals.
Most people are able to convert their inground pools to a salt system for around $1,700 to $2,500 plus the cost of salt (typically 25 cents to 63 cents per pound). This cost includes the salt chlorine generator, which can vary in price depending on the size and manufacturer.
Lower pH by adding muriatic acid or sodium disulfide to the water, and raise it by adding baking soda (sodium bicarbonate) or soda ash (sodium carbonate). Check the total alkalinity of the pool water before raising pH. If it's near the acceptable range of 80 to 120 ppm, use soda ash.