It is common to mix bleach with water; however, you can also add other ingredients to make it more effective. Similar to cleaning pavers with muriatic acid, avoid an intense concentration of bleach, as it can damage the pavers.
If vinegar does not work on your hardscape, you can use bleach. To create a powerful mold-killing mixture, you can add one cup of bleach to a gallon of water. However, you should exercise meticulous care and caution since bleach can discolor your brick pavers and thus ruin your precious hardscape.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
For human-made colored concrete paving slabs or concrete pavers, we don't recommend the use of bleach for cleaning. That's because the substance could fade your paver colors if regularly cleaned with bleach over a long period.
Bleach (For Mold, Mildew, and Moss): A bleach mixture is ideal for removing mold, mildew, and moss from exterior brick walls. Combine a tablespoon of bleach with a gallon of warm water in a bucket, then apply the bleach with a sponge to the brick. Use a scrub to tackle hard-to-reach areas or difficult stains.
Pre-wet the surface to be cleaned with water. Apply the bleach and water solution to the surface with a scrub brush. Reapply as needed to keep the surface wet for up to 10 minutes.
Pressure washing is great for new or particularly strong brick. Scrubbing with bleach, trisodium phosphate or buffered construction cleaner are other options. As with interior brick, it's best to avoid using a wire brush if possible. The wire can damage the brick.
Bleach: This alkaline solution may be effective for other household uses, but it can discolor concrete pavers that have been colored or stained.
The acid content in vinegar is particularly good at breaking down the molecules in clay surfaces. Standard bricks are made mostly from clay, so exposure to undiluted vinegar will quickly result in discolouration and a sticky chemical byproduct coating your bricks.
Cleaning pavers with bicarbonate soda and vinegar
Fill the bucket with lukewarm water and then add the bicarbonate soda, making sure it dissolves properly. Then add a little bit of white vinegar. Pour the solution onto the stained areas on your paver surface and use the scrubbing brush to apply it thoroughly.
There are useful tools for cleaning paving stones, such as joint scrapers, sweepers, and pressure washers. In addition, pavers can be cleaned with a small pickaxe, broom, and garden hose.
Mild detergent and water.
Mix some mild dish soap with water in a bucket to create suds, then use a brush or a sponge to scrub the surface of the pavers. If your pavers are textured or have intricate designs, this cleaning method can be gentler than a power washer.
As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
Cleaning brick pavers
Cleaning pavers with vinegar is a great way to get rid of stubborn moss, algae and stains on brick.
The phenomenon of efflorescence occurs when water soluble salts migrate to the surface of the paver with the help of water (i.e., condensation, rain). Once the mixture of water reaches the surface, it mixes with the carbon dioxide in the air and creates a white haze/film that covers the pavers.
If your deck is made from concrete, pavers travertine, brick, stamped concrete or composite decking, you can clean and refresh it for summer using OxiClean™ Versatile Stain Remover.
Baking soda has low-abrasive properties, making it an excellent cleaning material for stuck-on grime and tough stains. Additionally, baking soda is absorbent, allowing it to absorb oils from the surface of the pavers, especially freshly oil spill on concrete pavers.
Use soap and water, if the pavers are still dirty after sweeping and water hosing, make a solution of soap and water. You can use dish soap, laundry detergent, or any type of general-purpose cleaner. Never use bleach on your pavers, as it can damage the surface.
Use Bleach
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
If you don't have the supplies for the ammonia mixture, you can also use bleach or hydrogen peroxide to remove mold, mildew, and stains. Remove dirt and debris using the broom. Put on safety gear. Pour ½ cup of bleach or hydrogen peroxide in a spray bottle with 3 cups of water.
Clean your bricks with a cleaning solution, or by using undiluted white vinegar. Once you've prepared the surface of the bricks, you can apply a coat of concrete stain. You can adjust it according to the original color of your bricks. You can choose from a wide variety of water-based stains and acid-based ones.