Before installing the new water filter in your Samsung refrigerator, ensure the gaskets on the new filter are not damaged and seated properly. To install, reverse the steps. I always find it beneficial to run about a gallon of water through the new filter before drinking from it.
After replacing the filter, it is recommended to use the water after pouring out over 500ml.
Run two to four gallons of water through the new filter. This helps prevent your water dispenser from sputtering and clears impurities left over from manufacturing. Check for leaks around the filter.
Open the water valve and run water through the dispenser for about 5 minutes (about 2.5 gallons) to remove any trapped air and clear the system. 5 SamsungⓇ systems Storage and maintenance: Press and hold the ICE TYPE and CHILD LOCK buttons for three seconds. The water filter indicator should turn green.
The filter has a firm outer layer of filtration media that is densely packed. If you are using a new filter and find that it is taking longer than 35 minutes, it may require additional priming to allow water to pass through that outer layer of filtration media.
Flushing the filter also helps eliminate air bubbles in the water lines. Air bubbles trapped in the water line can impact water flow, cause water to sputter or dribble out of the dispenser, and affect ice cube quality. Choosing not to flush your filter can cause some issues or frustrations.
You should always flush out three to five gallons of water before drinking the water or using the ice from the refrigerator, regardless what brand of refrigerator or water filter you use.
Samsung filters out up to 80% more contaminants than other leading private label brands. Not only will you enjoy fresher and cleaner water, having a Samsung filter insures you won't deal with water leaking and other related problems that often come with using another brand.
As long as you have followed the proper instructions to flush your new water filter with three gallons of water, you can usually drink the water right after you've finished the replacement. Check the instructions for your filter to make sure.
If your Samsung® fridge has an internal filter, an auto shut-off valve can keep the water shut when swapping out the filter. Otherwise, do not manually shut off your water supply to avoid common installation issues like airlocks and others.
As your water filter begins to wear out, it will become less effective at filtering out the various chemicals, minerals, and microbes that may be present in the water supply. This may soon become apparent to you in the form of changes in the taste and odor of the water coming from your refrigerator.
The short answer is not necessarily.
An ice machine will operate without a filter, but will quickly start having problems will scale buildup, especially in a city where the water is considered “hard”.
Once your filter is replaced, run four gallons of water through the line to properly flush the new filter.
Secure the new filter by turning it clockwise. Run water through the dispenser for three to four minutes to clear away any air or debris. Reset your refrigerator filter's indicator light if necessary.
Flushing a new water filter is necessary to eliminate any initial carbon dust and particles. These impurities can accumulate during the production and packaging of the filter. If not flushed out, they can mix with your drinking water, affecting its quality and taste.
Dirty hoses and reservoir. If the filter is new and properly installed and there's still a problem, there are still a few things left to try. Another cause of less-than-fresh water is the hoses and reservoir inside the fridge—these can be cleaned, as well.
Always use Samsung brand filters. Filters from other manufacturers, even if they indicate compatibility, may damage your fridge and water filter housing, or break off and leave pieces of the filter inside (like the cap), preventing a new filter from being inserted.
Most Samsung water and ice dispensers will work without an AquaPure water filter installed. The water filter housings are designed as rotary valves that allow the water to bypass the water filter whenever there is no filter or the filter is not in the locked position.
If the ice maker appears to not be making any or enough ice, low water pressure or a faulty water filter may be to blame.
After the installation, make sure to dispense about 10 liters of water or dispense the water for 6 - 7 minutes before using the refrigerator to remove any impurities from inside the water filtering system. If you require more information, find a user manual or contact the Samsung service center.
Please keep in mind it does take 24-48 hours for your new refrigerator to fully cool. Run at least 1 gallon of water through the system (do not drink). Toss the first gallon of water out. It takes about 24 hours for the first batch of ice (do not use).
Calculation Using a Formula
Q = V/t, where: Q = Flow rate (typically measured in liters per minute or gallons per minute). V = Volume of fluid (in liters or gallons). T = Time (in seconds).