R-22 refrigerant prices range from $90 to $250 per pound. Since you'll need between 6 and 12 pounds to refill a home AC, costs can reach between $660 and $2,400 for a refill of R-22 refrigerant.
Well, the cost of an R-22 refrigerant recharge can range anywhere from $350-$1,450 (including labor costs)*. *The numbers above reflect the market prices for R-22 in 2018 but prices change frequently. Note: The price you pay depends on how many pounds of refrigerant your central AC needs.
R22 is very expensive because it's no longer produced so they use recaptured/NOS. If there's a leak you would want it fixed first. Replacement with a unit using the newer, available refrigerants is in most cases more practical.
While, technically, the answer is yes, R22 Freon is slowly depleting and will soon be completely unavailable. So if you want to recharge your cooling system with R22, it will be a lot more challenging for your HVAC technician.
How much will an R-22 to R-410A conversion cost? The actual cost will depend on many things, including where you live, but most of the time R-22 conversions start at around $2,000 and go up from there. The higher end of that range is somewhere around $4,500 to $4,600.
Also known as Freon, R22 was banned due to its contribution to ozone layer depletion and ecological harm. Freon is becoming scarcer and more expensive as a result. The new standard, R410A, is more environmentally friendly but cannot be substituted for R22 refrigerant.
Currently, the price for recharging an air conditioning system with R-410A is around $90 per pound.
If your unit uses R-22, it's probably at least ten years old. The average lifespan for an air conditioner or heat pump is about 10-15 years, so it might be time to consider replacing your unit anyway.
An AC leak will lead to warmer air from your vents over time. In most cases this can be fixed with a proven stop leak additive to seal up any leaks. When it's time for an AC recharge, turn to AutoZone.
How Much Does R-22 Freon Cost per Pound? The cost of R-22 refrigerant per pound is $90 to $150, plus the cost of installation and other service fees. Consulting an AC repair professional near you will be the best way to determine your price range per pound for R-22 refrigerant.
A Question of Supply and Demand
Therefore, maintenance people and air conditioning system specialists have less supply and are charging more for it. Some businesses have even reported thefts targeting their Freon canisters thanks to its newfound value. After 2020, R-22 won't be produced at all in the United States.
In 1987 an agreement called the Montreal Protocol was signed to begin the worldwide phase out of ozone-depleting CFCs and in 1992 HCFCs were added. In 2010, manufacturers were no longer able to produce new equipment designed with R22 and at the end of 2020, production and import of R22 will be eliminated.
As of January 1, 2020, production and import of R22 refrigerant will be illegal in the United States. Of course, continued use of your air conditioner (AC) or heat pump system using R22 refrigerant is allowed.
Residential Air Conditioner Freon Refill Cost
Most homeowners will pay in the range of $200 to $400 for a refill, depending on the type and size of their HVAC unit. If you own a larger r22 unit, you may have to spend $600 or more. To break this down for you, a 25lbs unit of r410A costs anything between $100 and $175.
The general guideline used when calculating the amount of Freon in a residential A/C unit is 2-4 pounds per ton of cooling. For example, if you install a new A/C system rated for a five-ton load, the system will require 10-20 pounds of refrigerant.
A professional AC recharge typically ranges from $150 to $300. This cost reflects the expertise required and the equipment used to ensure a proper recharge. On the other hand, a DIY recharge kit costs between $40 and $60. While this is a more affordable option, it requires careful handling to avoid issues.
If all that's needed is to have your system charged, the team at Jiffy Lube® can perform this service for you. They will remove the old refrigerant, vacuum test the system, and recharge your air conditioner with the right refrigerant.
In 2010, the U.S. stopped the sale of newly manufactured residential air conditioning units and heat pumps that use R-22 because of its particularly harmful impact on the ozone layer when released into the air. On January 1, 2020, the U.S. Environmental Protection Agency (EPA) banned the production and import of R-22.
Why is R-22 refrigerant so expensive? R-22 refrigerant is so expensive because there's such a limited supply of it left. You see, R-22 is an “ozone-depleting substance” and is extremely harmful to the environment.
Freon MO99 is the gold standard for R-22 alternatives and was developed by the same scientists who engineered Freon R-22. The benefits of Freon MO99 include: Capacity — The ability of Freon MO99 to heat or cool a given space is closer to Freon R-22 than any other refrigerant on the market.
According to PG&E, most central air conditioning systems use two to four pounds of refrigerant per ton of cooling capacity. A three-ton air conditioner would typically have six to 12 pounds of refrigerant for a proper charge.