Pour lemon juice or vinegar on the deposits. Don't dilute the vinegar or lemon juice, or you'll reduce its effectiveness. Leave the acidic liquids in place for a few hours to do their work, preferably overnight. Scrub the scale with a stiff-bristled toilet brush before flushing the toilet.
Vinegar and Baking Soda
Pour a cup of vinegar into the bowl, then mix it around with a toilet brush. Add a cup of baking soda to the coated areas and immediately follow up by adding another cup of vinegar. Wait about 10 minutes to allow the baking soda and vinegar to interact, creating that effective fizzing action.
The acidic values of vinegar allow it to soften limescale and prepare it for scrubbing clean. Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush.
For older stains, using an industrial-strength cleaner like CLR should do the trick. Another less conventional strategy you can try is removing the stains with Coca-Cola. To do this, simply pour a full can of Coke into the toilet and let it sit in the bowl overnight. Then flush the toilet the next day.
Black mold and mildew thrive in moist, dark environments, making the toilet tank or bowl an ideal breeding ground. Toilet mold can start to form when there's a consistent presence of moisture coupled with poor ventilation, often leading to black or dark green stains that can spread if not cleaned properly.
If you have ever noticed a pink residue or film on your bathroom fixtures, or in your toilet bowl — don't be alarmed, it is a common occurrence. Typically, pink residue, which can also appear dark grey, is formed by a common airborne mold bacteria called Serratia Marcescens.
Vinegar essence is therefore a better choice for harder-to-treat limescale – but it should always be diluted with water. Always wear gloves when cleaning with vinegar to protect your skin from the acid. A special tip: Coca Cola – this fizzy drink contains phosphoric acid which also removes limescale and urine scale.
The white or grey buildup is not just a cleaning challenge but a sign that your water might be too mineral-rich. Iron and manganese are minerals that, while naturally occurring, can cause significant staining in your toilet bowl when present in your water supply.
Pour white vinegar into the bowl to cover the stained areas. Let the vinegar soak for 30 minutes to an hour. Scrub the stained areas with a toilet brush. If the stains persist, sprinkle baking soda on the remaining stains and let it sit for up to 10 minutes, then scrub again with the toilet brush.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
Our favorite, editor-approved toilet bowl cleaner is the Lysol Power Toilet Bowl Cleaner. It's an easy-to-find cleaner that works great on tough stains, has a clean scent, and lasts for a long time.
One of the most obvious signs of hard water buildup is in the toilet. You might see a white or rust-colored ring forming at the waterline or staining at the base of the bowl.
The 0000-grade steel wool is recommended as it's less likely to scratch up the inside of a porcelain toilet. Additional Tip: Avoid relying on harsh chemicals and wasting your time having to scrub out hard stains by being proactive about cleaning your toilet.
Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).
Pour a half cup of bicarbonate of soda into and around the bowl and let it sit for at least 15 minutes. “After about 10 minutes, scrub the toilet bowl thoroughly with a scouring pad – you may need to use some elbow grease!” After scrubbing, “flush [the toilet] a few times to rinse [the limescale] away”.
Using this method regularly can help keep your toilet clean and hygienic. Additionally, you should use bleach or other cleaning products for tougher stains or odors. However, it's important not to leave the vinegar in the toilet overnight as it can damage the porcelain and reduce its lifespan.
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).
Heat 1 to 1 ½ cups of white vinegar to about the same temperature you'd take your coffee – not scalding, but warm enough. Add it to the overflow tube and give it about 30 minutes to work. Flush, then go to work on the jet holes, chipping away the scale with something small but solid.