Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.
Press and HOLD Program button until keypad flashes green (about 5 seconds). Enter new mastercode. Press Lock button once. Re-enter mastercode.
You will hear 3 long beeps after the 5 seconds is completed indicating the lock has been reset. A User Code is used to unlock the door while a Mastercode is a password for making changes to the lock features. Interior of door You will reset your User Code to 1-2-3-4 and Mastercode to 0-0-0-0 when the reset is complete.
If there is already an account associated with their email address, they will receive an app invitation. Note: Once the invitee has accepted your invitation, they will be able to pair their smartphone with the lock. A maximum of 8 smartphones can be paired to a lock.
The default Programming Code is 0-0-0-0. It is recommended that you change it to a code of your own. The lock is pre-programmed with a default User Code of 1-2-3-4. It is recommended that you delete this code.
If unsuccessful, the Kwikset button will flash red 3 times and you will hear 3 beeps. Note: If the lock is muted, you will not hear the lock beeping. Delete User Codes:The lock is pre-programmed with a default User Code of 1-2-3-4.
Inventory all the keys you have, sort them by cut so each group of keys has the same cut. Once you find a cut that you have enough keys for, re-key your locks to use it. The Kwikset "smart lock" does not manufacture cut keys. That requires metal-working, although it's an easy job for anyone with a key-cutting machine.
Thanks to the two-cylinder Key Control Deadbolt with SmartKey Security, you can have one master key for all your units and unique keys for all of your tenants.
No. Only SC1 5-Pin keys are compatible.
How do I delete a single user code on my SmartCode 909/910 deadbolt or 911/912 lever? Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three.
The master code can always arm or disarm the system, regardless which code was used to arm, or if the system was quick armed. On most panels, the master code can never be deleted, only changed or defaulted. User Codes: A normal user code can only arm and disarm the system and bypass zones.
To set a code for the second user, press the SmartCode “Program” button twice to program a security code for the second user, such as a relative. Enter a four to eight digit security code on the outside electronic lock keypad and press the “Lock” button again.
For example, if you want to program User Code 2, press the program button twice. Many Kwikset locks hold 4 User Codes, but some hold as many as 30 at once. The program button is a small black button in the battery compartment of the lock.
Two possible issues: The lock was not removed completely from another network before being paired with the new network. Follow your smart home system's instructions to remove (exclude/unpair) the device from any other network. Then, attempt to pair (add/include) the lock again.