Most cleaning experts recommend using a pH-neutral, stone safe cleaner. Spray the product onto the surface and allow some time for it to break down the compounds of the residue. Use a soft cloth or a non-scratch pad to rub and scour the area as it helps to even the surface.
Most water spots on natural stone can be easily removed by a specialty cleaner. Use a non-scratch pad or a soft cloth to rub and scour the area for a few minutes. After, rinse away with water. Make sure that any water you use to rinse the stone is thoroughly dried up afterwards to avoid any new hard water spots.
Natural stone should be cleaned once a week with a pH-neutral cleaning product like Simple Green All-Purpose Cleaner. The powerful cleaner dissolves tough soils and buildup without damaging your beautiful stone surfaces, and removes soap scum, body oils and greases, bath oils, soap, and shampoo oils.
Water rings & spots will typically disappear after spraying with a neutral stone cleaner, then buffing with a soft cloth or non-abrasive scouring pad.
Clean the grime off your tub, shower or tiles
Use Dawn and some hot water and a cloth or sponge to get into those nooks and crannies where grime and scale tend to build up. You can also combine Dawn with vinegar for stronger cleaning power, especially when tackling hard water stains.
Clean gently with a soft, liquid cleanser with bleach OR household detergent OR ammonia OR mineral spirits OR acetone. (coffee, tea, fruit, tobacco, paper, food, urine, leaves, bark, bird droppings) May cause a pinkish-brown stain and may disappear after the source of the stain has been removed.
Add undiluted vinegar to a bucket and apply it to your stone with the plastic brush. See if it removes the white residue. If it does then you don't need to use muriatic acid. If you need the muriatic acid you'll have to dilute it according to the directions on the bottle.
Removing Existing Hard Water Stains
Hard water residue from stone showers can be removed easily using a specialty cleaner. Avoid using acidic or abrasive cleaners as they cause more damage than good. Most cleaning experts recommend using a pH-neutral, stone safe cleaner.
Steam clean it.
The best way to clean your stone shower is with steam. Steam loosens up the stone pores and makes cleaning easier, try cleaning your stone after using the shower. Increase steam cleaning's effectiveness by calling the R&S experts.
Depending on where you live, you may to battle hard water stains on your pebble stone shower floor. If you start noticing white spots on your floors, it's time to take action. Spray your pebbles with white vinegar and let sit for about 10 minutes. Then, simply scrub and rinse.
These hard water stains are not permanent; however, if they're allowed to build up over time, you could end up with layers of scale in your bathroom plumbing or around the valves of your dishwasher which could lead to costly repairs down the line.
Baking soda is known as a stain remover. It can help to remove liquid stains such as tea, wine or coffee. It also helps to remove the unpleasant smells. It is quite affective on solid surfaces in general but it is not advised to use baking soda directly on natural stone surfaces.
Lay paper towels on the hard water and soak them with vinegar. Let the vinegar work on the stains for two hours. Remove the paper towels, rinse, and check to see if the stains are still visible. Use a baking soda and water paste to tackle stubborn stains and rinse again.
Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone.
If you are cleaning your natural stone floor or counter top like Marble, Limestone, Granite, Slate, Quartz or Travertine ect. if you use white vinegar on the natural stone it will react with the lime in the stone and etch or take off a layer of the stone and make it look dull and take away the beauty of the stone.
⇒ While using vinegar on granite countertops or natural stone surfaces, may damage the seal and polish layer applied to them. ⇒ Sometimes, vinegar can cause structural damage to your stone surface. ⇒ Instead of removing stains, vinegar can cause hard stains on the natural stone.
On light colored stones, clean with bleach or hydrogen peroxide. On dark colored stones, clean with lacquer thinner or acetone. Small amounts can be removed with lacquer thinner or scraped off carefully with a razor blade.
DON'T: Use harsh or abrasive cleaners and sponges.
Windex; acidic cleaners, like vinegar, lemon, lime; or anything with ammonia or bleach should be avoided. Frequent use of these chemicals will dull and weaken the sealant over time.
What you should Not Do: Don't use vinegar, lemon juice, or other cleaners containing acids on marble, limestone, travertine, or onyx surfaces. Don't use cleaners that contain acid such as bathroom cleaners, grout cleaners, or tub & tile cleaners. Don't use abrasive cleaners such as dry cleansers or soft cleansers.
For really tough hard water stains, try scrubbing with some hydrogen peroxide. Yep, the same stuff you have in your first aid kit. Hydrogen peroxide plus some elbow grease should banish even the most stubborn of hard water spots from your metal fixtures.
Removing Hard Water Deposits From Faucets
Use vinegar to help loosen the hard water film and buildup before scrubbing. Soak a clean rag in vinegar and drape it over the faucet, making sure there is direct contact with all of the hard water deposits. Let the rag sit for at least 30 minutes; an hour is better.