Chlorine serves a vital purpose in keeping swimming pool water clean and healthy. In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done.
Baking soda can work wonders in a pool. Baking soda can: Help to clear cloudy water and restore the sparkle. Spot-treat algae.
Chlorine. Chlorine is by far the most commonly used swimming pool sanitization agent. The goal of adding chlorine to a pool is simple: kill microorganisms such as bacteria and algae. A pool with excessive bacteria and algae is cloudy and unsafe to swim in.
How long does it take for a cloudy pool to clear? Depending on how cloudy your water is, it may take 2-3 days for your water to clear. If you're using a clarifier, you'll need to run your filter 24/7, keep your water chemistry balanced, and add the proper amount of water clarifier every other day until it's clear.
It's usually just a temporary reaction as the sanitizer works its magic, and doesn't always indicate a problem. But if the cloudy water persists long after you've shocked the pool, you're likely having an issue with water balance, circulation, or filtration.
For the most part, yes. It can be unattractive and it should be addressed, but it is mostly safe to swim in cloudy water. The only exception would be if the pool is cloudy because there are too many chemicals in it. This pool water would be unsafe to swim in and should be avoided.
Baking Soda
Most remedies call for adding additional chlorine into the water. If your water's pH balance is between 7.2 and 7.5, however, you can add baking soda to the water to help clear it up. This serves as a replacement for chlorine because baking soda is a natural cleaning agent.
Chlorine issues often cause cloudy water. Adding a recommended dose of pool shock to your pool can clear it right up. Poor circulation or filtration can contribute to cloudy water. Make sure your pump and filter are working properly.
A clarifier requires less work and less water but can take to two to three days to achieve the results you are looking for.
In a nutshell, pool clarifiers are “mild” versions of flocculants. They're great for mildly cloudy pool or if you have a silt problem that your filters just can't catch. What they do is they bind to these tiny particles to increase their size, allowing your pool filter to catch them.
Pool Chemicals
Excessive levels of pool chemicals can cause your water to become cloudy. High pH, high alkalinity, high chlorine or other sanitisers, and high calcium hardness are all common culprits.
Foaming in a pool means there are high levels of total dissolved solids (TDS) in the water. TDS are the measure of solid matter that has liquefied. Foreign solids like oil, soil, and dirt dissolve in pools. High levels of TDS makes pool water look cloudy and can even make it taste salty.
It's not a good idea to use pool shock at the same time as clarifier. Some clarifiers are polymer based and the shock can act to break up the polymer causing the clarifier to be ineffective. It's best to shock your pool before and wait a day or two before adding clarifier.
You can dilute the baking soda in a bucket of water or just broadcast it over the entire surface of your swimming pool. It should take about 24 hours before your swimming pool completely clears. Be patient here and make sure your swimming pool is circulating the whole time you are trying to clear up your swimming pool.
Some of the best natural homemade pool clarifiers include baking soda solution, bleach, white vinegar, lemon juice, rubbing alcohol and borax. Compared to commercial chemical clarifiers natural ones have enzymes that break down the dirt in the water making it easy and cheap to filter them out.
Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.
Vinegar contains acetic acid which makes it a great disinfectant. It is also acidic in nature hence removes dirt, grease and mineral deposits. If used in the right amount, its acidic nature also plays a role in lowering the pH of pool water.
The use of baking soda in pools can spot treat algae
It can turn any backyard pool murky green or cause unsightly black spots on the walls and floor of any swimming pool. If your algae come in the form of black spots, it can be extremely tough and frustrating to try and get off your pool's interior.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.