Adding soft close to your cabinets means you'll never have to hear a door slammed again. These hinges will ensure the door shuts smoothly and silently. In addition, they also prevents fingers from being slammed in doors due to the door closing too quickly. This is a major bonus for families with young children.
When looking in the long term, soft close cabinets also have the potential to increase your home's overall value for resale.
The soft-close feature usually costs about $15 to $23 per drawer, plus the cost of the drawer itself.
When a soft-close hinge has stopped working, it's most likely due to one of the screws becoming loose. This will cause the hinge to come out of place or allow the door to sag down. To repair this, all you need to do is find the loose screw and tighten it with a screwdriver.
In general one soft hinge is sufficient on majority of the door and closing habits. Two would provide more dampening and thus you can slam the doors harder with more satisfying effect.
There is a difference in soft close and self close. Self close means when you close the door and it get within 2" of closing, it will pull itself close because of the spring in the hinge itself. Soft close would be that the door gets about 2" away from closing, and then slows itself to softly close.
Steps to Installing Soft Close Models
Insert the new door hinges in the same place you took the old ones from. Drill them in if they do not fit into the holes. Use a drill bit for the small hole and then screw in the new hinges. Now it is time to reinstall the doors of the cabinet.
Attach spacer, by clipping to adapter. Start wood screw through the adapter before placing. Place soft close hinge damper adapter butted up in the top corner of the cabinet against the side wall and top of cabinet. Close the door to see if it closes completely and in the time you desire.
Soft close drawers can often be difficult to open, and this comes with the technology. However, there are sometimes other issues that can make it even more difficult. If you are having trouble with your soft close drawers, these steps should make things quite a bit easier on you.
"Soft"-closing means just that it glides. The drawer or door is pushed and it glides to a certain point and then hydraulics take over. The drawer is eased to the closed position, gently and quietly.
Due to the normal wear and tear or wrong installation, soft closing cabinet drawers may sometime present some challenges when closing. They may either bang or drag when closing, and this means that something is wrong with the slides or the runners. It could also mean the drawer box was built out of square.
It's a bit more expensive than regular cabinets, but it can really help prevent damage and wear in the long run.
It is absolutely possible to convert existing kitchen drawers into a soft close upgrade. Rather than purchasing an entirely new set of drawers, you can simply buy and install the hardware alone. This way, you can keep the paint and style of your current set of kitchen drawers.
A pantry or a butler's pantry will add value to your property. In recent years, storage space has become an important feature in homes, and experts agree that around 50-75% of what you spent to build the pantry can be added to the value of your home.
The DTC C-80 concealed cabinet hinge is a high quality soft-close hinge that offers a lifetime of reliable use. With a relaxed opening and perfect close, it's a great choice for any project. The DTC C-80 concealed cabinet hinge is a high quality soft-close hinge that offers a lifetime of reliable use.
With a medium hinge setting, you can adjust your cabinet door. To adjust the speed of a soft close hinge, turn the adjustment lever in a clockwise direction so that it points toward the ceiling. Let there be 10 millimeters (about an inch) between the tab and hinge when adjusting.
We always recommend installing 2 Self Closing Spring Hinges per door. If you are using 2, install 1 at the top and 1 at the bottom.
The number of hinges you need depends on the height and weight of the door. Use two hinges for doors less than 40 inches high and less than 11 pounds. Use three hinges for doors 40 to 60 inches high and 13 to 20 pounds. Use four hinges for doors 60 to 80 inches high and 29 to 33 pounds.
If you have soft close drawers, you can likely adjust them with the built-in adjustment tabs. These are found on the underside of the drawer box. There are some guides that also have a tilt adjustment, found on the back of the drawer slides.
Check each drawer guide at the sides or at the bottom to see if there's a clip or lever on one or both sides. If there's a clip, remove the clips and then, with both hands supporting the bottom of the drawer, pull the drawer out. If there are levers, pull the levers down or up simultaneously and pull the drawer out.
Apply lubrication. You can use spray-dry lubricant, which is the preferred method, or wax. Simply rubbing a candle on the runners should be enough to get things working smoothly again. If you don't have a lubricant or a candle, tape can also get the job done.
Generally speaking, the terms "soft close" and "self close" drawer glides are interchangeable. The feature stops drawers from slamming, and gently pulls drawers closed the last few inches.
Dirt, dust and old lubricant (or lack of it) can make drawers hard to open and shut. Cleaning gummed-up guides will help; so does the right lubricant.