The best way to clean and maintain vinyl floors is to mop your floors regularly using just water. When you want to disinfect your floors or do a deeper cleaning, you can mix your own gentle solution using some general household products.
Never use a detergent that is abrasive. Vinegar or “mop and shine” products may leave a film on your film, rather than give you that shiny floor that you seek. Never use a wax polish. Never use an abrasive scrubbing tool on your floor.
One essential tip for maintaining your luxury vinyl floor is not to mop too often. Once a week or twice a month is plenty.
Dip a microfiber mop into your cleaning solution and wring it out until it's barely damp. Using a dripping mop can allow water to work its way into seams, cracks, and edges in your flooring and cause damage. Keep your mop as clean as possible with frequent rinsing and remember to wring it out thoroughly each time.
Swiffer wet cloths are designed to be used on most floor surfaces, such as: vinyl.
Instead, learn how to clean vinyl floors using the mildest possible method. Sweep or vacuum it every evening, and wipe up spills right away. To clean dirt that the broom or vacuum can't get, use a mop dampened with warm—not hot—water. If all else fails, use soap, but make sure the soap is designed for your flooring.
Pine-Sol Multi-Surface Cleaner – Yes, Pine Sol on vinyl floors is a fine option; however, use sparingly with water. Do not oversaturate your vinyl floors with too much water, use just enough to disinfect the floors.
Too much cleaning product used
Most people think that using too much floor cleaning solution will lead to squeaky-clean floors. This is usually not true and can easily lead to a sticky residue after cleaning.
Microfiber mops are a popular pick for cleaning vinyl and other types of hard flooring. These mops can be used for both dry dusting and wet-mopping floors. Combined vacuuming and mopping devices offer a two-in-one clean with minimal effort.
Manufacturing vinyl flooring requires the use of toxic chemicals, and after installation, vinyl floors have been known to emit VOCs (volatile organic compounds). Off-gassed VOCs can adversely affect health and an indoor environment, particularly without windows or ventilation, will lead to higher concentrations.
Add a bit of baking soda to your regular floor cleaner to help keep the vinyl fresh, smooth, and shiny. Applying a small amount of WD-40 lubricant is a safe way to remove any scratches or scuffs without damaging the vinyl. You can also use a bit of jojoba oil to gently polish vinyl floors.
DO NOT use All-Purpose or Multi-Purpose cleaners, detergents, abrasive cleaners or “mop and shine” type products (such as Bleach, Pine-Sol, Clorox Soft Scrub, Fabuloso, Rejuvenate, Mop & Glo, Mr. Clean, Murphy's Oil Soap and similar, unapproved cleaners), as they will dull the finish and sheen of the flooring material.
Vinyl Flooring “Don'ts”
Don't use wax or solvent-based polishes. Don't use ammonia or ammonia-based cleaning solutions. Ammonia can break down the vinyl and cause it to crack.
Regular mopping with a mild detergent mixed with warm water is recommended instead of harsh chemicals which could damage the finish over time. Taking the time to properly maintain your vinyl plank floors can help them look great for years.
Swiffer is designed not to leave a residue and should provide a great clean on virtually any floor in your home. For best results, make sure the product is suitable for your floor. Do not use Swiffer Wet cloths or the Swiffer WetJet on unfinished, oiled or waxed wooden floors, non-sealed tiles, or carpet.
At this point, your floor should now be quite clean, with little or no detergent residue left. But for an extra cleaning step, you can mop over the entire floor a final time using nothing but fresh hot rinse water. If your rinse water gets at all dirty or sudsy, you will know the final rinse has been necessary.
A: It depends on the airflow and weather conditions the day that the service is done but usually drying requires around three to six hours.
A diluted bleach mixture, commercial disinfectant and isopropyl alcohol are all good choices. A vinegar solution can work quite well to clean floors, but it is a weak disinfectant.
A: Yes you can It's soap so it is fine. I have used on Vinyl floor with no issues a capful at a time cleans floor you do not need much.
Note: Disinfecting wipes that contain bleach are acceptable on vinyl. 7.5 to 9 is the recommended pH for bleach.
But, what about those stubborn scuff marks that appear over time? Mr. Clean® knows how to remove scuff marks from ceramic/vinyl floors in just two simple steps. With a passion for cleaning all messes (including scuff marks on ceramic/vinyl floors), Mr.
Overall, microfiber mops have more pros than Swiffer mops. Microfiber mops can be used as a two-in-one to both sweep and mop at the same time. However, a Swiffer mop can typically only clean after the sweeping has already been done.