The majority of Schlage locks will have the company's name stamped into the exterior face of a deadbolt. Check the external side of your door to see if you can find the name stamped on the lock. If you cannot find the name on the deadbolt face, take a close look at the latchplates.
Schlage has a number of SC1, and Kwickset has a number of KW1. Depending on the manufacturer of the key, they may not have the name stamped on one side. They may not have the numbers on the side either. However, the shape of the head will always be the same.
You can check this by looking on the faceplate of the lock, the number of levers should be stamped there. For optimum security the 5 lever mortice lock should be Kitemarked and conform to BS3621. If it is, these details should be stamped on the lock faceplate.
Default access codes, HomeKit™ setup code, and Programming codes are located on the stickers on the front of this guide! You will need these if you ever need to reset your lock back to factory default settings! The sticker also contains your serial number, which may be needed for warranty and customer service support.
Schlage interchangeable core cylinders are available in a variety of different key systems – open or restricted. Interchangeable core users can enjoy the convenience of fast rekeying without having to disassemble the lock.
The main difference between them is that the SC1 works on 5-pin locks, while the SC4 works on 6-pin locks. This means that the SC1 can handle most standard Schlage locks, while the SC4 can handle some of the more advanced and secure Schlage locks.
Most exterior locks purchased in-store come with a unique key. That means if you purchase multiple exterior locks at once, they will each have a different key required for access.
Before you can program your Schlage keypad, it is important to understand the two different types of codes: the six-digit programming code and the four-digit user code.
What is the difference between a 3 lever and 5 lever lock? The difference between a 3 lever lock and a 5 lever lock is that a 3 lever lock is less secure because it has fewer levers which increases the risk of key duplication. Also, a 3 lever lock will NOT be BS3621 approved due to the poor security of the lock.
Expect to pay $80 to $300 per lock, depending on quality, and up to $200 more for professional installation. Many door locks, however, are DIY-friendly and come with installation instructions. Rekeying door locks. In apartment complexes, this is now the most common way of changing locks on a door.
Burglars may try a number of methods to try and gain access to your home, including picking your lock. The most obvious signs your lock has been tampered with are visible dents and scuff marks around the key hole.
Each chamber holds one digit in the key code. For example: A Schlage C Keyway has a 5-pin length, which means there are five chambers, and each chamber is assigned a number corresponding to the key code. The first chamber would hold the “4” in key code 46251.
Inside Schlage Button • Located on the inside of the door. Used to silence the alarm. Does not lock or unlock the door. Thumbturn • Used to lock and unlock manually from the inside.
Look at the sticker on your lock's user manual or inside the lock underneath the keypad to find the default User Codes. All Schlage locks come with 2 default 4-digit User Codes so you and a visitor can use the lock right away without programming it.
Offline locks with keypads have a default PIN of 13579 and “#”, which can be used for installation, testing and construction access. To test, enter the default PIN (13579 and “#”). The Schlage button will blink and the lock will unlock.
User Codes • A User Code can be any combination of 4 - 8 digits entered into the keypad to unlock the lock. The first 4-6 digits must be different from the first 4-6 digits of the Programming Code. Two User Codes are programmed into the lock by default.
Resolution: Battery Jump Procedure: The emergency battery jump start can be used to unlock the door if the batteries are dead. WARNING: The lock will remain unlocked until you change the battery and relock the door.
As you can see in the picture below, Schlage uses 4 security pins (called “Spool pins), while Kwikset uses only 2. Having 2 more security pins in a cylinder can make it significantly harder to pick, which can definitely be felt when trying to pick a Schlage lock.
Schlage Rekeying Kits provide everything you need to get the job done—including all the tools and parts you need for repinning the cylinders of most Schlage locksets so that they work with a single key. Navigating your way through the Kit tray.
Schlage Sense works with HomeKit for controlling your lock using Siri. Schlage Connect is designed for Alexa and Z-Wave integration. Schlage Encode is a WiFi lock that doesn't require a hub. Buying the right lock is essential since if you get one that doesn't work with your set up, you will feel a little stuck.
A: A Schlage type C lock is simply a normal residential door lock.