Algae is often a problem for backyard pool owners. With regular maintenance, chlorinating compounds stop blooms. However, when untreated, it can cause minor damage to a pool and pool equipment as well as be a danger sign to swimmers and those who frequent the pool.
Closing a pool that is green with algae, or dirty with debris or with water that is unbalanced, leads to heavy staining and saturation of the water with dead algae cells, which makes it easier for subsequent generations to grow.
Green algae, which are a common sight in unmaintained swimming pools, aren't harmful. However, the bacteria that feed on the algae can present a health risk to humans. Green algae exposure can mean bacteria exposure, leading to rashes and various breaks on human skin.
If you have a light green pool, you need to shock your pool in order to kill algae. Algae feeds off high pH levels and chlorine isn't as effective when your pH is high. You will need to lower your pH using hydrochloric acid.
You can get rid of algae quickly by vacuuming and brushing your pool, balancing your pool's water chemistry, and then shocking and filtering your pool water. Just be thorough as you clean your pool surfaces. If you leave behind even a small number of algae spores, it won't be long before they regrow and bloom again.
Pool algae occurs for many reasons. Low or inconsistent chlorine levels, faulty pool filtration and poor water circulation may be to blame. Preventing pool algae from flourishing helps to keep your pool operational so you can enjoy it all season long. The key to an algae-free pool is regular maintenance.
Pool algae can be caused by poor filtration, out-of-balance water, low or inconsistent chlorine levels, or poor water circulation. Green, dark green, yellowish green and blue-green algae are the most common. Green algae are slimy.
Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you're using.
Can you put too much shock in a pool? SKIMMER NOTES: It's unlikely but it could happen. It would take a lot of shock to really make the water unsafe for swimming. The best way to make sure you're safe to swim is to test your pool water and make sure free chlorine levels are between 1-4ppm for healthy swimming.
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
What's important for you to know: You shouldn't swim in a pool that's green until you test the chemical levels, like the officials in Rio did before the diving event began. It's the balance of things like chlorine, pH, and alkalinity in a pool that keeps it sterilized.
Proper chemical balance and sanitizer levels will prevent many opportunities for algae to bloom. High pH and low chlorine (or other sanitizer) can give algae a great start.
So if the pool water isn't cloudy and the 'dirt' is clinging to the walls after brushing, the problem is likely be yellow/mustard algae. Yellow/ Mustard algae is very resistant to even high chlorine levels and will grow and thrive in a chemically well-balanced pool.
Much like the veggies in your garden, when the water is cold algae won't grow. Algae is not happy if the water is below 50 degrees. The winter kit chemicals dissipate after a few weeks, but they help keep your chemicals balanced and the pool clear until your water turns into a popsicle.
If conditions are right, these spores can spread rapidly and take over the pool in a short amount of time. Warm weather, sunlight, lack of circulation in the water, and nitrates or carbon dioxide in the water can all be contributing factors for algae growth.
When the levels are properly balanced, chlorine will keep the algae at bay, but the water will slowly begin to turn green as the algae take over if there's not enough. But be careful—adding too much chlorine in pool water can cause those metals to oxidize and turn the pool a different shade of green.
In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done. But, the amounts may vary and you may have to really pound the pool with chlorine to get the water totally clear.
Shock is chlorine, in a high dose, meant to shock your pool and raise the chlorine level quickly. Chlorine tabs (placed in a chlorinator, floater, or skimmer basket) maintain a chlorine residual in the water. You do need to use both tabs and shock.
High doses of chlorine, like pool shock, can cause temporary cloudiness as it kills contaminants. High levels of pH, alkalinity, and calcium hardness are more likely to cause cloudy water.
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
After Shocking Your Pool
It is safe to swim once your chlorine levels are around 5 ppm or after 24 hours. It is always best to test first!
A fiberglass pool in its worst condition can be algae-free in 24 hours. For a vinyl liner pool, the process can take 3-4 days. For a concrete pool, this can take a week or more.
ADD POOL CLARIFIER
The change in your pool water colour means that you have successfully eliminated the algae and can now clean it out of your pool. If your water is still green, wait another 24 hours and redo the steps from Days 1 and 2. Now is the time to add Pool Clarifier and let it circulate for 12 hours.
A nylon or rubber brush is the correct choice for scrubbing the sides of a soft-sided above-ground pool. A large pool brush makes quick work of the job, but you may need a smaller brush to clean corners. Once the particles have been removed from the sides of the pool, turn your filter back on and agitate the water.
Rainwater itself does not cause algae, but it can provide the right environment for algae. Rain will bring phosphates, nitrates and other organic contaminants into the pool. As we discussed earlier, rain also reduces chlorine levels.