Does Borax Kill Mold? Borax is a solid mold killer. If you have a significant mold infestation, you might want to clean the mold with borax, then leave a layer on the surface to prevent further growth. Borax kills mold because of its high pH.
To remove mold, borax needs to be combined with with water. Borax is also a natural mold inhibitor. Create a borax-water solution using a ratio of 1 cup of borax per gallon of water.
Luckily, both Borax and vinegar are completely safe cleaning products! By using Borax cleaning powder diluted with vinegar and warm water, you're able to effectively remove any mold problems. Moreover, you can also use Borax as an ecological insecticide, herbicide, and even deodorizer!
Does Borax Kill Mold? Borax (sodium borate) is slightly stronger than baking soda. With a pH level above 9, borax creates an unfavorable, high-alkalinity environment that kills mold and inhibits it from regrowing. It's weaker than ammonia, but it's a natural product and doesn't produce harmful fumes.
Borax has long been recognized for its disinfectant and deodorizing properties. Mix a 1/2 cup of Borax into 1 gallon of hot water or undiluted vinegar and clean with this solution.
Applying borax to mold creates an environment that is not suitable to additional mold growth. In many cases borax kills mold spores by turning up the pH levels and making their environmental inhospitable. Borax won't always kill mold but in many cases it will.
If the mold is still hanging on, it's time to bring out the borax, which is an alkaline mineral salt cleaner that's safer to use than bleach. Combine a tablespoon of borax with a cup of water, then apply this solution to the mold with a soft-bristled brush. Scrub away the mold, leaving the borax solution in the wood.
Make an all-purpose cleaning spray
To create an all-purpose spray, dissolve 2 teaspoons of borax into 4 cups of hot water, then mix with 1 teaspoon of dish soap and 4 tablespoons of vinegar.
How to do it: Mix 1 tablespoon of borax into 1 cup of warm water, says Syren. Apply the mixture to the wall, covering the stain. After 10 minutes, wipe the mixture away with a damp cloth.
The effectiveness and affordability of white vinegar makes it an excellent choice for use on just about any surface. It is also effective to use to prevent mold from returning to problem areas. Simply spray the problem area lightly every few days and wipe.
Mix one part hydrogen peroxide with two parts water in a spray bottle. Spray mixture in the shower stall or other non-porous surface and leave to dry for an hour. Rinse the area with clean water and allow it to air dry.
Clear a clogged drain
Before you reach for a caustic drain cleaner to unclog that kitchen or bathroom drain, try this much gentler approach: Use a funnel to insert 1/2 cup borax into the drain, then slowly pour in 2 cups boiling water. Let the mixture set for 15 minutes, then flush with hot water.
White vinegar kills mold and bacteria and gets rid of bad odors. Spray white vinegar onto the shower, rinse, and wash the area with dish soap. You can also use hydrogen peroxide to kill mold, rinse, and wash with castile soap. Both methods kill mold and then remove the dead mold spores by washing them away.
Mix the warm water with the borax until dissolved. In a spray bottle, add in this borax water, vinegar, and soap. Give it a little shake. This works exceptionally well on ceramic showers, outside of toilets, sinks, bathroom counters, bathroom floors, and anything around the bathroom.
Oxiclean powder is essentially washing soda with sodium percarbonate, which turns into hydrogen peroxide. It's color safe and works great to get rid of stains and keeps whites white and colors bright. It's also much safer / less toxic than Borax. Borax works well too, helps get rid of stains, and whitens clothes.
Add to Each Laundry Load
Add one-half cup of borax to each load to boost the cleaning power of your detergent. The dry powder should be added directly to the washer drum in a front or top-loading washer before adding the dirty laundry.
Take care to protect yourself by wearing eye protection, gloves, and a facemask, if necessary, and test the product in a small area first before continuing. Mix one part bleach to four parts water. Wipe and gently scrub the mould until it is gone.
Combine 1 part bleach with 2 parts water in a spray bottle and spritz the affected area. Let the solution sit for 10 minutes. The mold should start to fade away on its own, but if areas of stubborn mold remain, use a coarse brush (for larger areas) or old toothbrush (for smaller areas) to scrub the mold away.
Mold generally looks slimy or fuzzy, tends to have a raised texture, and can come in a rainbow of colors, including deep green and black. Mildew is powdery, looks white or gray, always appears flat, and grows on surfaces.
Some of the insects that borax kills include ants, flies, and other insect larvae. Borax is an ant poison, and it controls flies around manure piles. It also prevents larvae from growing. The main insect borax kills are termites.
Bugs like roaches, ants, and fleas won't stand a chance, because borax is also a desiccant. That means it absorbs water from its environment, preventing any pests from living where you sprinkle it.