A spray consisting of equal parts vinegar, baking soda and water is an excellent multipurpose cleaner. Sprinkle a cup of borax and a quarter-cup of vinegar into your toilet bowl, let it sit overnight, then scrub and flush in the morning.
The most commonly recommended natural and non-toxic way to clean a toilet is with vinegar and baking soda. Simply poor two cups of vinegar into a toilet bowl, and pour one cup of baking soda. When the solution stops fizzing, spread it over the bowl with a toilet cleaner brush. Leave for 10-15 minutes and rinse.
Make a paste by mixing 1/2 cup of Borax and enough vinegar to form a thick paste. Spread the paste immediately onto the hard water stains in the toilet so they are completely covered by the paste. The Borax will harden quickly so don't add the vinegar until you are ready to apply the paste.
Baking Soda
Baking soda, also known as sodium bicarbonate, is another beloved DIY ingredient for non-toxic cleaning. Its mild abrasive, water-softening, whitening, and stain-fighting properties make it an excellent non-toxic bleach alternative.
If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.
Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.
Vinegar and baking soda
Pour about one cup of white vinegar into the toilet bowl, followed by about one cup of baking soda, then let it rest for around 10 minutes. It's a good idea to wear gloves when using this as a toilet cleaner and to have eye protection.
"The biggest don't when it comes to toilet tanks is bleach—do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet. If you are aiming to remove tough stains from the tank, I also recommend white vinegar diluted with water."
If you want to really get your toilet tank clean, then you need to make sure you have the right cleaning products for the job. Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits.
You can clean toilet stains with a toilet brush, baking soda, and white vinegar. Household cleaning ingredients like Borax or a wet pumice stone can also scrub away tough mineral stains. If a light cleaning can't break through stubborn toilet bowl stains, you're probably dealing with mineral stains.
Just as natural dish soap helps break down dirt, grease, and food that may be stuck on dishes and utensils, it can help break down what's in your toilet bowl. The important thing is to reach for a non toxic dish soap that, once it's flushed and enters the water supply, will be safe for animals and the planet.
To safely and inexpensively clean your toilet bowls, pour a generous glug of vinegar, followed by a heavy sprinkling of baking soda, into the bowl. While the mixture is bubbling up, scrub the bowl (get under the rim, too). Let it soak for 30 minutes and flush. That's it.
In this case, a basic toilet cleaning product may not be enough, and you will need to use undiluted bleach. As a one-stop cleaning solution, pour one cup of bleach around the bowl. Then tackle every inch with a toilet brush or a handheld scrub brush. Let it sit for five minutes, then flush.
Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.
Hydrogen Peroxide and Vinegar
“Combining these two creates peracetic acid or corrosive acid, an irritant that, in high concentrations, can harm the skin, eyes, throat, nose, and lungs,” says Bock.
Don't mix hydrogen peroxide with vinegar
Hydrogen peroxide and vinegar can be used on the same surface as long as it dries in between applications but they should never be mixed. When the two are mixed, it creates peracetic acid, which can harm the skin, eyes, throat, nose and lungs.