Can a locksmith open a Master Lock?

Author: Charley Jast  |  Last update: Friday, June 3, 2022

The best way to unlock a master lock is to call a professional emergency locksmith service to do the job for you. It might be a bit expensive compared to some of the other methods, but you will save a lot of time in the process. A professional locksmith will be able to make you a spare key for the lock.

How do you open a Master Lock if you lost the key?

1. Break the padlock with bolt cutters
  1. Step 1: Choose a suitable pair of bolt cutters. ...
  2. Step 2: Fix the lock with pliers or a vise. ...
  3. Step 3: Apply indirect force on the cutters. ...
  4. Step 1: Check the direction of the lock. ...
  5. Step 2: Smooth the side where the shackle will fall off. ...
  6. Step 3: Open the padlock.

How do I force a Master Lock to open?

Turns out, any Master Lock can easily be broken into with just a small hammer. As this video illustrates, all you need to do is tap the side of a Master Lock with a hammer to get it to open, no key, no combination required.

How do you break a Master Lock with a screwdriver?

Jiggle the screwdriver while thrusting it in and out of the lock. Slide the blade of the screwdriver back and forth slowly. At the same time, work the handle of the around at different angles to engage as many pins as possible.

Are Master Lock keys universal?

No. Without the key number, there is no way for Master Lock to know which key will open your lock. There is not a master key that will open all Master Lock products.

[753] You’re Doing it Wrong... The REAL Double Wrench Method

How do you break a Master Lock without a bolt cutter?

By far the easiest way to cut a padlock is with bolt cutters.
...
How to Cut a Padlock Without Bolt Cutters (9 Quick & Easy Methods...
  1. Use an Angle Grinder. ...
  2. Use a Dremel. ...
  3. Use a Propane Torch and Hacksaw. ...
  4. Use a Cutting Torch. ...
  5. Use a Hammer. ...
  6. Use a Shim. ...
  7. Lock Picking.

Can bolt cutters cut a Master Lock?

Try bolt cutters.

This will not work on most master locks, as they are made of case hardened steel.

Can you drill out a Master Lock?

Yes, it is possible to drill out a master lock. However, it won't work on all of them. Use a drill and a 1/4 inch drill bit and drill through the center of the mechanism. That way, it destroys the locking mechanism.

Can you make copies of Master Lock keys?

Master Lock does not provide keys directly to consumers; however, you may take one of your keys to a local hardware store, home center or locksmith where they can cut duplicate keys. Please note that not every store will have the appropriate key blanks available.

What is a 999 key?

Bump keys are specially cut keys that can bypass the security mechanisms built into traditional pin and tumbler locks. Bump keys are also referred to as “999 keys” because all of their ridges are cut to the maximum depth (999) in a key-making machine.

Is there a key that can open all locks?

Master key: The master key can open all locks you have in your residential or commercial property.

What is key bump in slang?

The “bump” in “key bump,” the dictionary explained, can be defined as “a small quantity of an illicit drug when inhaled in powdered form at one time.” Thus, an English speaker can “refer to 'small amounts of drugs sniffed off a key' as 'key bumps,' ” Merriam-Webster noted.

What is a Kwikset bump key?

Bump keys are specially cut keys that can bypass the security mechanisms built into traditional pin and tumbler locks. Bump keys are also referred to as “999 keys” because all of their ridges are cut to the maximum depth (999) in a key-making machine.

Is there a way to retrieve Master Lock combination?

If your lock has a serial number, you can recover your combination in one of three ways. You can visit a Master Lock Distributor / Retailer or submit a Lost Combination form. Bring your lock to the retailer. Be sure that it is not attached to anything.

Does Home Depot sell bump keys?

Step 1 Make the Bump Key

Go to the any store that has blank keys. Wal-Mart and Home Depot have them. They look like this, without teeth at all: A bump key is made by using a triangular file (they're at every hardware store…

Do bump keys damage locks?

Lock bumping takes only an instant to open the lock. The lock is not visibly damaged, although the force of the bump can leave an indentation on the front of the cylinder. Certain clicking and vibrating tools designed for bumping can also be used. These allow for rapid repetition of bumping.

Whats the purpose of a Killer Key?

The Killer Key can instantly and permanently disable a lock. Once inserted into a lock it can not be removed, making it impossible to unlock the door. The door can still be opened from the inside, so no one can be locked in, only locked out.

What are coke nails?

UrbanDictionary.com defines a coke nail as “one significantly longer fingernail on one or both hand(s), most often the pinkie nail, which is used for scooping up powder cocaine and snorting it. This is known as doing a bump.

What does simp means in slang?

Urban Dictionary's top definition of a simp is "someone who does way too much for a person they like." Other definitions on the crowdsourced online dictionary include "a man who puts the hoes before the bros," and "a guy that is overly desperate for women, especially if she is a bad person, or has expressed her ...

What is a key in drug terms?

The slang term “Key” (also spelled Ki) or “Keys” is a noun, which is used to reference drugs, specifically cocaine.

Is there a master skeleton key?

Although a skeleton key is a “master key,” not all skeleton keys are the same. The size and cut of the key's bit, as well as the diameter of its barrel, determine whether it fits with a lock. Additionally, antique (or reproduction antique) skeleton keys are known for their intricate details.

What is grand master key?

Definition of grandmaster key

: a master key designed to fit a number of different master-keyed systems of locks.

What is a master pin in a lock?

Master Pin: Usually a cylindrical shaped tumbler which is often flat on both ends, placed between the top and bottom pin to create an additional shear line. Rose: A circular or decorative trim plate attached to the door under the knob or lever.

Will drilling through a lock open it?

Lock-drilling is a last-resort approach to gaining entry to locks that cannot be opened by other means. Drilling a lock will destroy the locking plug, but should leave the mechanism in working order.

Previous article
Do smart locks have batteries?
Next article
How can I cover my hardwood floors?