Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
To keep your pool clean, all the water must run through your pump's filter system at least once a day. This is called turnover rate. It's simple: in order to run your pump effectively for eight hours, your pump should be able to process all of your pool water during that time.
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
Chemicals that you add to your pool while the water is circulating don't need to be recirculated; they will stay mixed even if you don't pump the water continually. Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.
In dry and/or windy conditions, the evaporation rate of the pool increases. Therefore, it is generally beneficial to have a transparent or bubble cover on during daylight hours. In warm, humid conditions the evaporation rate decreases. In this case, it may be more beneficial to leave the cover off during the daytime.
Your pool can keep running for a few days with no problems while without a pump. However, know that a standard pool needs a pool running for at least once in 24 hours, or you might notice an algae bloom. So, it's best to have your pump ready as soon as possible.
To prevent potentially dangerous electrical issues, it's imperative that you turn off the power to your pool equipment — such as pumps, motors, filters, heaters, chlorinators, and lighting fixtures. Even if you turn off the power to your pool equipment, it can still be damaged by wind, rain, and debris.
Run the pump for 8 hours, every 24 hours. You can also pause in between; there is no need to run it continuously. Ideally, after you shock the pool, be sure to run the pump at night and during non-peak hours, to save on your energy bills.
The Short, Short Version. Test Chlorine levels at least twice per week. Also make sure to test after heavy use or rainfall, as Chlorine levels have likely been depleted. Pool chlorine is responsible for sanitizing your pool and hot tub water to make it safe to swim.
Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.
The best time to run your pool pump is during the warmest hour of the day; however, keep in mind that this means you will have higher energy consumption, which may lead to an increase in your electric bill. If you want to save on your energy costs, you can run your pool pump at night to avoid peak hours.
So while a solar cover won't actually 'turn your pool green', it will warm your water by up to 8 degrees, so if the other conditions are right, adding a solar cover can easily accelerate algae growth, very rapidly. You need to get the water balance in your pool right before putting the cover back on.
You should cover your pool every night for several reasons. First off, a pool cover saves energy and conserves water by decreasing the amount of make-up water. Also, it reduces the consumption of chemicals, and finally, it saves a lot of cleaning time since it keeps the debris out of the pool.
The longer you leave your pool cover on, the more likely it is to tear and rip. The elements put stress on your pool cover which can then lead to damage. Additionally, debris and animals can cause rips and tears too. Be sure to take good care of your pool cover to keep your water clean and clear.
Depending on the size of your pool, we still recommend the pump run 8-10 hours per day during the hottest summer months and at least 6 hours per day during the winter months.
The point of running your pool pump in the winter is to keep your water moving, which prevents it from freezing should temperatures get too low. So ideally, run your pump (and keep it running) whenever temperatures start getting close to 32 degrees Fahrenheit, the freezing point of water.
Cleaners aren't meant to stay in the pool 24/7. This is true for all cleaners. Pressure side cleaners run on a schedule every day so why take it out? Leaving the cleaner in the pool 24/7 increases its exposure to corrosive chemicals in the water, such as chlorine or shock.
How much does a pool cost to run? The average swimming pool will cost between $660 and $1,000 to run annually – consuming between 2,000 and 3,000 kilowatt hours of electricity. That's about $23 each week!
The average cost to run a pool pump is about $40 per month.
Generally, you can expect to pay somewhere around $300 to $800 a year on the chemicals you'll need to maintain a chlorine pool. For a saltwater pool, you can expect the cost of chemicals and salt to run closer to $70 to $100 a year. However, there are other expenses to consider.