Check your circuit breakers: Reset any tripped breakers. Check your fuel supply: If you don't smell gas in the home, try another gas appliance (e.g., your stove). If it won't ignite, chances are it's a supply issue. Check your air filter: Regularly change your air filter.
You may have a faulty sensor, sticky motor, bad controller board, too many closed dampers, a blocked air return, incomplete combustion, cracked heat exchanger, blocked condensate line, etc etc. some of these things are life-critical situations. The blickenlights will tell you.
There are several reasons why your furnace may not turn on. The most common include a broken thermostat, gas line issues, clogged air filters, blocked ductwork, a tripped circuit breaker, and issues with the furnace itself.
A poorly functioning heat sensor is one of the common reasons behind a heat press not heating up. These sensors detect excessive heat if it occurs and have a tendency to burn out when this happens. A compromised temperature sensor will limit the machine from heating up until replaced.
The most likely explanation here is that not enough fuel is being burnt quickly enough to generate the heat output capabilities. It is really important to get the stove very hot right at the start when first lighting the fire.
A Recap of Why the Thermostat Says Heat On But No Heat Comes from the Furnace and What to Do About It. Dirty air filter–Change it. Gas supply turned off–Turn on the valve or call the gas company. Incorrect thermostat settings–Review all the settings and change them if necessary.
If your furnace turns on but no heat is produced, there may be a problem with the fuel supply or the ignition system. If something is stopping your furnace from receiving gas, there is no fuel to combust so the furnace will not create any heat. The furnace turns on but no heat comes out.
Turn the Thermostat Knob to the right (clockwise) and wait for the press to come up to heat. The Heating Light will be lit while heating. When the thermometer indicates the desired temperature, turn the temperature knob back to the left (counter-clockwise) slowly until the red heating light turns off.
Clean your Air Filters, Vents, and Ducts – A clogged air filter will struggle to meet the thermostat's set temperature since the dirt and debris buildup prevents air from circulating through the vents. And as airflow into living spaces drops, so do comfort levels.
Checking your thermostat is the best place to start. Make sure it's set to “heat” and that you've set the temperature higher than the current room temperature. If that doesn't resolve the problem, try switching your fan to “on” to force the furnace to start working.
If your thermostat won't turn on the heat in your home, change out the batteries and see if that fixes the problem. If not, your faulty thermostat could be the result of the following: A tripped breaker. Loose wiring.
The cause of your furnace not blowing hot air could be the thermostat configuration, a dirty air filter, the high limit switch, a clogged condensate line, insufficient fuel, leaky ducts, ignition problems, a blocked burner, flame sensor issues, gas valve malfunctions, a cracked heat exchanger, or a clogged coil.
Furnace Not Igniting Because of Incorrect Thermostat Setting
Make sure the thermostat is set to heating and that the temperature is set high enough to actually turn the furnace on. It may be set at too low of a temperature to activate the furnace.
Most likely, your furnace is making a clicking noise and not providing heat because your furnace's spark igniter is trying to ignite your pilot light or burners but is failing to do so. In other words, there's an ignition system malfunction that needs to be fixed. Otherwise, your furnace won't start.
In general, there are 3 items you can check if your heat press is not performing as expected: Overloaded Electric Circuit. Undersized Circuit Breaker. Broken or Damaged Heating Elements.
If your HVAC system suddenly stops functioning altogether and doesn't respond to user input, it could be due to a blown fuse supplying power to it. If your HVAC system's temperature, fan speed or modes are unresponsive to any adjustments, this could indicate that its fuse has blown.
Use the reset button on the side of heat press to reset it. If that doesn't work, take a moment to plug something else into the wall outlet you're using for the press. It might be that you've tripped a circuit breaker. If you see this, turn the machine off and back on.
If I shouldn't keep reapplying, what do I do to eliminate the cold spots? If your press is imported or not a Hotronix®, it probably has a heating element that either travels around the upper platen in a “U” shape, or it zig-zags like a “Z” shape. There is no fix for this except a new Hotronix® press.
If nothing's happening when you're expecting the whir of a blower, check the circuit breaker and fuse. At your electrical panel, make sure all switches related to the HVAC system are on. Reset any tripped breakers and replace all blown fuses, and your furnace should kick back on.
One of the most common issues with a heating system not functioning is dirty air filters. If your air filters are extremely dirty, then the airflow can be blocked. Check for clean air filters, vents, and registers. Make sure there are no rugs or furniture blocking vents or registers as well.
Defective Igniter or Pilot Light
If it clicks but your furnace won't ignite after the combustion cycle, the electronic ignition systems probably need to be replaced. In cases where the furnace ignition starts normally but only stays on for a few minutes and then goes out, a new pilot light likely needs to be installed.