In all likelihood you are describing Serratia, an bacteria that can be airborne. It's a ubiquitous bacteria in our environment and in our bodies. This airborne Serratia settle and colonize moist surfaces like at the water line in your toilet bowl. It has a pink to gray color and is easily cleaned off.
Vinegar and baking soda
Pour about one cup of white vinegar into the toilet bowl, followed by about one cup of baking soda, then let it rest for around 10 minutes. It's a good idea to wear gloves when using this as a toilet cleaner and to have eye protection.
Vinegar and Baking Soda: - Pour about 2 cups of vinegar into the toilet bowl. - Add 1 cup of baking soda. - Let it sit for about 30 minutes, then scrub with a toilet brush and flush.
Mold growth in toilets is caused by moisture buildup. This can occur for a variety of reasons, including high humidity levels in the bathroom, poor ventilation, and leaks or cracks in the toilet or plumbing. Other factors, such as infrequent use or cleaning, can also contribute to mold growth in the toilet.
The two main causes are: Mold or Bacteria – Stagnant water in your toilet, pipes, or water heater can cause the growth of mold or bacteria, which then discolor the water. Sewage Backup – A more alarming cause is a sewage backup, where sewage water is being pushed back into your home's plumbing.
Always wear gloves when cleaning with vinegar to protect your skin from the acid. A special tip: Coca Cola – this fizzy drink contains phosphoric acid which also removes limescale and urine scale.
When it comes to being good for the environment, CLR has a slight advantage. It's biodegradable and part of the EPA's Safer Choice Program, which recognizes products with safer ingredients. Lime Away works well, but it doesn't have the same environmental certifications.
Get rid of toilet rings with magic erasers
Cut off a quarter of a magic eraser and drop it into the toilet water. Let the piece sit in your toilet overnight to work its… well, magic! Do not flush the magic eraser down the toilet ! Remove it in the morning, then flush to rinse away any residue.
Bon Ami, Bar Keepers Friend, and The Pink Stuff are mild abrasives that are particularly effective at removing mineral and rust stains from hard, nonporous surfaces. While mineral deposits are usually the culprit when unsightly rings form in a toilet bowl, bacterial formation is also common.
Scrub it away
Use plumbers cloth or pumice stone to remove calcium deposits in your toilet bowl. Whichever method you choose, apply plenty of water before you start. Wet the cloth or pumice stone, and focus on the stains when you scrub. Try to avoid rubbing the porcelain vigorously, as you could scratch it.
Minerals in the water supply and even the chemicals used to clean can lead to toilet bowl rings and the staining and discoloration on other faucets, fixtures and surfaces.
Avoid using cleaner tabs—they often contain bleach, which is a no-no for cleaning toilet tanks because of bleach's corrosive properties. Add a cup of white distilled vinegar to the tank once a month. Leave it to sit overnight and then flush it in the morning. Check for sediment buildup and staining every month or so.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
He said: “Making a vigorous acidic solution is best done by using white vinegar. Pour a half cup of bicarbonate of soda into and around the bowl and let it sit for at least 15 minutes. “After about 10 minutes, scrub the toilet bowl thoroughly with a scouring pad – you may need to use some elbow grease!”
Using this method regularly can help keep your toilet clean and hygienic. Additionally, you should use bleach or other cleaning products for tougher stains or odors. However, it's important not to leave the vinegar in the toilet overnight as it can damage the porcelain and reduce its lifespan.
Yes. The acid in coke will help to dissolve limescale and there are several examples of it being used to clean toilets, descale kettles and in other circumstances.
Shut the water supply OFF to the toilet, then add half a cup of clorox and use the toilet brush to scrub the inside of the tank... let it sit for an hour.... then brush it again and flush immediately. Then use a small 1/4" round brush under the rim below the seat to clean all those tiny holes.
You can also add a few teaspoons of bicarbonate of soda to some warm water and a splash of vinegar and you have a non-toxic deodorizing and cleaning solution. Consider adding a filter to your plugs to prevent too much debris from going to the grey water system.
Graywater is not approved for use with hose bibs, nor any inside water uses such as, but not limited to, toilet flushing.
Our favorite, editor-approved toilet bowl cleaner is the Lysol Power Toilet Bowl Cleaner. It's an easy-to-find cleaner that works great on tough stains, has a clean scent, and lasts for a long time.
WD40 is "really good at removing limescale from your toilet", Victoria Plum noted, as it's "particularly good at softening rust and limescale deposits in the toilet".