Rinse the fiberglass bathtub with the help of cold water and wipe away the excess water with the help of a paper towel. Now you can use a magic eraser to wipe away all the stains and dirt once again.
Magic erasers are abrasive and will not only take off the wax but will dull the fiberglass finish. I remember reading that they are equivalent to 3000 grit sandpaper. Here's a nice link about the things you should not do with a magic eraser...
The best way to clean fiberglass is with a paste made out of vinegar and baking soda. Try using an all-purpose cleaner to wipe down fiberglass with help from a professional house cleaner in this free video on fiberglass cleaning tips.
To use the Magic Eraser you simply wet it and squeeze it, then rub it on the surface you want to clean. Check that the surface you're cleaning is suitable first, of course. They're fine on plastic baths.
Confirm whether the surface of your steps is fiberglass or acrylic. If fiberglass, I would NOT recommend using a Magic Eraser - it will dull and eventually strip the gel coat. No worries about using a Magic Eraser on acrylic, although I avoid scrubbing very hard and cleaning them excessively.
Use a brush to scrub the stains and your pool will be good as new. However, if the rust stains are bigger or more persistent try rubbing a chlorine tablet directly on the stain. If there is copper in the water, you may see turquoise stains in your pool. You can use pool cleaners to make these stains go away.
Q: hot tub
A: I would not use a Magic Eraser in a hot tub with water because Magic Eraser dissolves as it is used up and that would be left in the water. It would be fine in cleaning a dry fiberglass hot tub.
Don't Use Them On Your Car
Or any other delicate surface, for that matter, like silverware, glass, or metal surfaces. Dry erasers have the abrasiveness of a 3000 grit sandpaper – very fine, but can still mar shiny surfaces – like your stainless steel appliances!
The toughest jobs call for even tougher cleaning products: disinfecting cleaners, vinegar, sometimes even bleach. But if have persistent stains and want to remove the soap scum, add one more product to your cleaning caddy: Dawn dish soap.
Before you retire to the couch, rinse out your Magic Eraser and give your newly freshened surfaces a water wipe down, too. If what you cleaned will come in contact with food, you'll need to wipe it with a wet rag or paper towel, so it will be ready for the next time you meet again.
A: The nice thing about fiberglass tubs and showers is that no matter how dirty they become, they are fairly easy to clean. Be careful not to use any abrasives on the fiberglass, such as scouring pads, steel wool or gritty cleaning solutions. “Soft Scrub” may be used sparingly on soap scum buildup.
The most common is white vinegar mixed with baking soda and water. Simply mix the ingredients together until you get a paste-like consistency, then apply it directly onto the surface of your shower using a damp cloth or sponge. Let the mixture sit for fifteen minutes before rinsing it off with warm water.
For tough stains, including rust, left by bath products sitting on a shelf or floor, mix laundry borax and a bit of lemon juice to form a paste. Spread the mixture on the stained area and allow it to work for 15 minutes before wiping it away with a microfiber cloth.
Fiberglass tubs can be cleaned with baking soda, water, and distilled white vinegar, says Dills. Wet the bathtub with warm water. In a spray bottle, mix equal parts white distilled vinegar and warm water.
Magic erasers are VERY abrasive. Don't use them on something that easily scratches like wood or skin. They work great for cleaning shoes, walls, soap scum, etc. Wear gloves.
Miracle Method can refinish a variety of surfaces including fiberglass, porcelain, acrylics, cultured marble, ceramic tile, Corian™ as well as Formica™ and other laminates.
Applying dish soap before the night gives the solution ample time to work its magic. As the hours pass, the dish soap loosens and lifts away the grime that has taken residence on your bathtub's surface.
Dish soap, known for its grease-fighting properties, pairs excellently with vinegar, which acts as a natural disinfectant and deodorizer. This blend not only targets stubborn stains and buildup but also leaves surfaces sanitized and fresh.
If your fiberglass shower is especially grimy, prewash it with several drops of dish soap, like Dawn, mixed with 2 cups of warm water prior to applying your vinegar wash. Fill a bucket with vinegar. Apply vinegar to the fiberglass shower by soaking a rag or sponge in the solution and wiping it directly onto the doors.
No wand-waving here: The “magic” of the eraser is simply melamine, a nitrogen-rich organic base that, in its solid state, is a powerful-yet-delicate abrasive. Melamine is a widespread chemical compound used in everything from dry erase boards to sound insulation on bullet trains to your grandparents' Formica table.
STEP ONE: WET YOUR MAGIC ERASER.
Water activates the tough micro-scrubbers, so they can dig deep and remove hard water stains from glass and the toughest soap scum, making cleaning shower glass easier than ever.
Clean Magic Eraser Bath is safe to use on acrylic tubs, but definitely skip the bleach. If you're going to use a ready-made cleaner on your acrylic tub, carefully read the label to make sure it won't damage the tub's surface.
You Can Use a Magic Eraser to Clean Your Swimming Pool—Yes, Really! Oh, and there's no scrubbing required in this viral hack. While the theme of the season continues to be "hot girl summer," admittedly, we're more into clean girl summer.
What Are Magic Erasers Made Of? Magic Erasers are made from melamine foam, using a compound called formaldehyde-melamine-sodium bisulfite copolymer.