TIP: Standard cabinet sizes are in 3” increments. I.E.: 27”, 30”, 33”, 36”, etc. In general your sink should be at least 2-3” smaller than your cabinet size. For example, a 36” sink base cabinet can easily fit a 33” sink.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
Base cabinet size
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
Kitchen Cabinet Kings
General rule of thumb is actual sink should be 3" in actual width less than the sink base for smooth fit. However if you notch the sides of the cabinet, you should be able to get something as tight as 1.5 less than cabinet to fit.
A typical 33 x 22-inch sink will fill a 36-inch base cabinet. If you're replacing a sink, make sure it fits the existing cutout. If the cabinet allows, you may be able to install a larger sink by expanding the cutout. A farmhouse sink may require a special cabinet size.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
The length of the sink you order needs to be less than the width of the interior of the cabinet, with a little room to spare. For example, 36'' wide cabinets are often outfitted with 33'' sinks.
A 36" sink will fit into a 36" cabinet easily if you strap it in place. Manufacturer's allow for chubby plumber fingers to access clips to tighten. If you eliminate the clips, you eliminate the need for access.
The most common sink sizes for a 30-inch cabinet are 24 to 27 inches wide. These sizes offer a comfortable fit within the cabinet and provide enough room for daily use.
A better quality stainless steel kitchen sink is the 18-gauge, which is 0.0500 inches. Many home improvement choices recommend 16 to 18 gauges as a good choice for a stainless steel kitchen sink. The more costly, a 16-gauge stainless sinks is often touted as a luxury sink and are 0.0625 inches thick.
The standard size for a kitchen sink can vary, but a typical size for a single-bowl sink is around 30 to 33 inches in width and 20 to 22 inches in depth. Double-bowl sinks can range from 30 to 48 inches in width, depending on the bowl size and configuration.
So, the best shape of a sink mostly depends a lot on the look you are going after. Oval and round sinks have a more traditional and classic look, while square and rectangular ones have a more modern and sophisticated look. Another factor that may affect your choice of sink shape is the available space.
The best color for a sink could be traditional white, multi-colored through to a statement black, including metallic finishes in silver, gold, and bronze. There is a huge selection of sink colors and shades to harmonize and blend with your existing bathroom, kitchen, and washroom color schemes.
The most common options are 50/50, where the sink bowls are the same size, and 60/40, where one basin is larger for larger pots and pans. Another common kitchen sink configuration is to install the garbage disposal in the smaller basin of a double basin sink, to use the smaller side as a prep sink.
Standard-sized kitchen sinks measure 22 inches by 30 inches.
While the front-to-back measurement of the sink typically remains the same (roughly 22 inches) due to the size of most cabinets, the length of various kitchen sinks can vary immensely.
Most Popular By Configuration. Single basin, apron/farmhouse, workstation, and double basin kitchen sinks are the most popular sink styles for the upcoming years.
Some sinks will be labeled 30" Kitchen sink, but the basin size is in fact 28". [This sink will fit!] While other sinks are named after their TRUE 30" basin size [This will NOT fit]. Which means you CAN fit some "thirty" inch sinks in a 30" kitchen sink base cabinet.
30 inches- Used for single basin sinks. 33 inches- Used for offset sinks, or double basin sinks. 36 inches- Used for double basin sinks. 42 inches- This is the largest width in a base cabinet.
Typically, kitchen base cabinets have standard dimensions. They range from 24 and 36 inches in width and 24 to 30 inches in depth and tend to stand at 36 inches high, including the countertop.
Corner Sink Base Cabinet Options
It is easiest to find corner kitchen sinks to fit into stock or semi-custom corner sink cabinet base options. For many of our projects we used have used 36” corner sink base cabinets and were able to have the 24” wide undermount sinks fit in perfectly.
A 33" sink will undermount into a 33" cabinet if you strap or harness, not clip or block, the sink in place. Disregard the sink manufacturer's instructions please; I've done this hundreds of times.It is not a difficult process at all.
A 33" cabinet will only fit a 30" sink.
In general your sink should be at least 2-3” smaller than your cabinet size. For example, a 36” sink base cabinet can easily fit a 33” sink.