Low-voltage lighting systems are not permitted to be installed within 10 feet of the nearest edge of the water for a pool, spa or fountain, unless otherwise permitted by Article 680. With the acceptance of new text in 680.22(B)(6) of the 2014 NEC, many of these installations will now be compliant.
One light for roughly every 8 feet of pool is the ideal option and allows for even light distribution and ensures an even glow without hot spots or dark spaces.
a. At least one (1) 15 – 20 ampere convenience receptacle must be located no closer than 6' feet but no further than 20' feet from the outside of the pool wall. (Can be existing and/or wired with any approved wiring method) (see diagram 2 & 2a) b.
Having a set of lights fall into the pool and potentially injure someone is a risk you should avoid. Why even create the potential for an accident. Don't install string lights over the pool.
Pool lights should be placed at mid-height, almost at the surface of the water. For practical reasons, this will make changing the lighting equipment easier. This position in the structure will give you the best effect, rendering well-lit contours and highlighting the depth.
Always try to have the lights point away from the house. By doing this you will avoid the headlight effect of the lights shining in your face. If you build a spa with your pool you will want a light in it also.
As this is being written, a full sized LED pool light usually cost between $450 and $650 installed. If you go for the smaller LED lights you're looking at $300 to $500 installed. When you have full-size incandescent pool lights they are in the range of $450 to $650.
Can Solar Lights Electrocute You? Answer: Not directly. Solar lights are powered by solar energy stored in extra low voltage rechargeable batteries and are usually not wired to be live wires. They will only send electric current if they electrically short out, just like any other electrical device.
Can you get electrocuted by solar lights? There is almost no risk of getting electrocuted by solar lights. Most solar lighting is weatherproof, so the wires are insulated to prevent water from getting in. The current used by most solar-powered lighting isn't high enough to reach a lethal threshold.
If you need to know the electrical requirements for your inground pool, here is a list of common pool equipment and the approximate volts and amps required for each: Pool Pump: 240v, 10amps. Salt Water Chlorinator: 240v, approx 5-8 amps. Pool Heat Pump: 240v, 50 amps.
How to test pool water for electricity? One way to test pool water for electricity is to use a device called shock alert. It will notify you if there is electricity present in the water. If it beeps and flashes red, it means there is a presence of electricity in the water and you should not swim in it.
According to the National Electric Code, power lines over pools must be at least twenty-two and a half feet above the water level to avoid electrical hazards. Some companies will not install pools under power lines at all depending on the location.
Technically, yes. You can add pool lights to your existing pool, but it might mean that your pool needs to be remodelled, which requires a considerable amount of work. If you have an older pool, it could be a good chance to combine your need for lights with the need for a pool refresh.
Are pool lights worth it? Pool lights are worth it because they provide the necessary lighting for a pool especially during the night, which prevents accidents because you can see every area of your pool. Moreover, they are considered a necessity most especially if you want to get maximum usage out of your pool.
An LED light will save you roughly 75% on your energy usage compared to a comparable incandescent light. REMEMBER, that LED pool lights cost more, on average, than a simple incandescent light so your cost savings will not start till you recoup the additional money that you spent on the LED lights.
It costs a lot of money to have sales people to go to all the different pool store chains that must be covered in the bulb price. You aren't paying for a better bulb, you are paying for expensive overhead and multiple mouths to feed when each bulb is sold.
The number of lights you need depends on the size of your swimming pool. 15' x 30' pools only require one light. 20' x 40' pools require two lights. 20' x 42' pools and up require three or more lights.
12V pool lights operate with the use of a transformer that steps down the voltage from 120V to 12V. 120V bulbs will not work in a 12V pool, and vice versa, and a 12V bulb will burn out if used in a 120V lamp. The first thing then, is know what voltage your pool light is, 12V or 120V.
Ideally, there should be no wiring above a pool or the surrounding deck. In fact, CEC Rule 68-054 prevents pools from being located under overhead wiring. However, locating a pool below overhead conductors is sometimes unavoidable.
Electrical wires over water features have unique requirements: For electrical wires over a pool or hot tub: a minimum vertical clearance of 22 1/2 feet measured to surface of water or the base of the diving board. For electrical wires over a pond or lake: a minimum vertical clearance of 17 feet.
Make sure overhead electrical lines do not pass over the pool. In fact, it's best to keep a pool at least 25 feet away from power lines in all directions.
Shock Alert will notify you of electricity present in water. If it beeps and flashes red, DO NOT SWIM. If it flashes green, no voltage is detected. Due to the tragic nature of these injuries and deaths, Shock Alert was created to detect the presence of electrical voltage in water.