Make sure that the fullness of your curtains is about twice the width of the window. So if your window is 50” wide, you will want 100” of panel curtains. It is important to keep your window balanced. So if you put two panels on one side, then put two panels on the other side as well.
MEASURE WIDTH
The curtain width should measure 1 ½ to double the width of the window for fullness.
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
To get the measurements, measure the width of the rod from left to right. For instance, if your window measures 72” wide, you will need curtains that will give a maximum width of 144” (window width x 2 = 144”.)
For example, for a 60-inch window with two curtain panels, add 24 inches to 60 inches (window width) and divide by 2 (number of panels) to get 42 inches. The two panels ordered each need to be at least 42 inches wide.
Keep in mind that the width measurement is flat. If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
If you are interested in a curtain with grommet tops, there will usually be an inch and half of fabric above the top of the grommet. Therefore, an 84 inch length curtain with grommet tops will have an actual hanging height of around 82.5 inches.
If you want to keep the spacing even on an operable grommet drapery, you can set fixed spacing by tacking gimp braid, twill tape, cord or grosgrain ribbon on the back, below the grommets. That is a very easy solution and will keep the grommets evenly spaced when opened and closed.
Grommet drapery panels have been a popular choice for draperies for years because they offer a modern, sleek look. Grommets come in a variety of sizes and colors so they are easily worked into any decor.
Yes, They should! The length of the curtain determines the height of the curtain rod. Therefore, even if you buy curtains that are 84 inches long, if the curtains hang from the rod without rings, the rod must be approximately 84 inches from the floor to enable the curtain to touch the floor and avoid the awkward look.
Example: If your window measures 36″ wide (window width x 2 = 72″), you need curtains that will give a minimum width of 72″ or 2 panels for that window. In this case 2 panels will give about 100″ to 120″ of width which will look nice and full.
In Closing. For a 9-foot ceiling, 96-inch curtain panels are typically a good fit. This allows you to hang curtains that reach the floor, with the rod placed one foot from the ceiling. If you prefer curtains that pool on the floor or curtains that hang higher, just pick the next size up.
Sizing. A grommet that is 1/4 inch larger than the rod diameter slides smoothly along the rod. For example, a common 1 5/8-inch grommet glides over a 1 3/8-inch diameter rod.
To do it, you cut the toilet paper rolls to about three inches in length. Next, remove your curtains from the rod. As you rethread them on the rod, insert a toilet paper roll between every other opening. Rehang your curtains, and they'll look both pleated and fuller.
Just hang your drapes inside-out (with the lining facing you) and arrange the folds. Make several small stitches in the top of the lining hem and a few more on the next fold, leaving just enough thread between the two folds to allow them to hang straight.
Curtains with a grommet top have metal rings punched into the fabric that allow them to slide along the rod easily. This easy operation makes Grommet Curtains the perfect fit for draperies you want to open and close every day.
Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. "Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don't look right in most scenarios and end up being an awkward length," says Curtis.
Floor length: Long curtains that go from above your window frame all the way to the floor to create a traditional, formal look. Typical curtain length for this style is 84 to 96 inches; these curtains will fall about 1/4-inch above the floor.
The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings. This lets the hem of the curtains brush the floor.
Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more - sheers can be 3 times the window width) to achieve a look of proper fullness.
Having a length in mind for your curtains might also affect how wide you decide to go. A cafe length curtain that's too wide will look completely unbalanced, after all. Of course, for living rooms and bedrooms, you'll most likely be looking for curtains that graze the floor.
For a 120-inch window, how wide should curtains be? Depending on the weight of the fabric and how much you want the curtains to be. At least a width and a half is what I would recommend. 180 inches is the width of each curtain.