The way you apply granular chlorine to the pool is by using a large pail and fill it with hot water (the exact quantity of water doesn't matter, just fill the pail). You then add the granular chlorine to the water in the pail (always chlorine in water, never water on chlorine).
Chlorination is the process of adding chlorine to drinking water to kill parasites, bacteria, and viruses. Different processes can be used to achieve safe levels of chlorine in drinking water.
Depending on its levels of content, the evaporation time for chlorine from tap water can be estimated: 2 ppm of Chlorine will take up to 4 and a half days or around 110 hours to evaporate from 10 gallons of standing water.
If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.
Liquid chlorine is not stabilized and will burn off quickly in sunlight. Therefore, it should be administered in the evening, after the sun has set. Hold jug of liquid chlorine as far away from your body and as far into the pool as is comfortable and safe.
Chlorine is a natural element and an ingredient of bleach, while bleach is a solution and the product of combining chlorine and other chemicals. 2. Chlorine exists in nature, while bleach is a manufactured product.
Liquid chlorine
They are identical in every way, with the exception of strength. Household bleach is usually a 6% concentration (although some of the cheaper stuff is 3%), while pool chlorine can typically be found in strength between 10% and 12%.
When chlorine gas (Cl2) is added to the water (H2O), it hydrolyzes rapidly to produce hypochlorous acid (HOCl) and the hypochlorous acid will then dissociate into hypochlorite ions (OCl-) and hydrogen ions (H+). Because hydrogen ions are produced, the water will become more acidic (the pH of the water will decrease).
The optimum chlorine level should be somewhere in between 1 and 3 ppm (parts per million). If the level is less than 1 ppm, additional chlorine should be added.
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.
A chlorine level of between 3-5mg/l must be maintained in your hot tub at all times. The addition of chlorine will depend upon usage and bathing habits. It could be daily or every 2-3 days (for 1mg/l add 2g per 1000 litres).
Chlorine is much stronger than bleach. To get your pools chlorine level to the point it needs to be to keep the pool looking clean and bright; you will need to use more bleach than you will chlorine. Bleach is also going to come in a liquid form only, and chlorine is most commonly sold in tablets.
Pour 1 part liquid bleach and 4 parts water into a bucket. Repeat until full. Chlorine Solution - Cleaning.
Bleach Versus Pool Chlorine
In addition to the chlorine itself, calcium and other inert ingredients make up the remainder of the chemical. Household bleach is a liquid that contains sodium hypochlorite, which is simply chlorine in its liquid form. Bleach, however, is typically only 5 to 6 percent chlorine.
Since liquid chlorine will burn off quickly in direct sunlight, it's best to add it to your pool in the evening. Wait until the sun begins to or has set.
You can add chlorine in tablets and sticks directly to the skimmer, and they slowly dissolve into the pool water. Liquid chlorine comes in gallon containers. You can apply it by pouring the liquid into the skimmer or directly into the pool water.
After you shock the pool — As soon as your chlorine levels reach 5 ppm or lower, it's officially safe to swim. Depending on the type of shock used, as well as the amount used, it can take anywhere from 24 hours or even up to a couple of days.
The basic balance of chlorine to water is between 1 and 3 ppm, or 0.00013 ounces of chlorine per gallon of water.