There are four types of high-power toilets made for the residential market. All have one thing in common: more flushing power than the standard gravity-assisted toilet. Here are the high-power toilets to choose from: Pressure-assisted.
When it comes to strength of flushing, pressure-assist designs are stronger than gravity flush mechanisms, but slightly less powerful than vacuum-assist ones. The design is similar to that of the vacuum-assist toilet, which makes use of a pressurized tank that functions like a huge water balloon.
Power Flush Toilets Deliver Water Savings and More
Pressure-assisted toilets are effective using as little as 1 gallon per flush (gpf), while gravity toilets often use 1.6 gpf or more in older models. Pressure-assisted toilets are also less likely to need double-flushing, because waste is pushed out on the first flush.
To increase toilet flush power, you can adjust the water level in the tank to 1/2 inch below the flush valve. Adjust the chain length to 1/4 inch of slack. Get an adjustable flap. Increase the water level in the bowl to the maximum height. Clean the rim holes with white vinegar.
New technology and design advancements, such as pressure-assisted flushers and modifications to bowl contours allow high-efficiency toilets to flush better than first-generation low-flow toilets.
Locate the screw that attaches the float to the fill valve (usually on top of the fill valve). Using a screwdriver, turn the screw in small increments to adjust the water level. Clockwise will raise it and counterclockwise will lower it.
When the federal government mandated that new toilets use no more than 1.6 gallons per flush, manufacturers had to develop a toilet that would achieve this but that would also flush properly (clear the bowl) and carry the waste to the city sewer or septic system. Some of the early models did not do this properly.
It is quite common for minerals such as calcium and lime, along with debris particles such as rust to build up in the rim feed and jet holes of the toilet bowl. Over time, these deposits restrict and block water from flowing into the toilet bowl which will cause a weak or incomplete flush.
One of the primary considerations when assessing a toilet's flushing power is its Gallons Per Flush (GPF) rating. GPF refers to the amount of water used for a single flush. In the past, most toilets used 3.5 gallons or more per flush, but advancements in technology have led to more water-efficient options.
Elongated toilets can have a more powerful flush system, which may avoid having to “double flush.” Elongated toilets require more room than a round toilet, so take this into consideration if space is an issue. Round toilets can be installed for potty training, then replaced with an elongated one as your child goes up.
The Champion® Flushing System has the industry's largest flush valve and an extra-wide trapway that is virtually clog-free so you'll never have to plunge again! The Champion Toilet Collection is not only strong but also efficient, saving you both water and money.
This type of toilet produces a greater flush as it uses gravity to flush the pan. Low/high level toilets are an ideal style to complement a traditional style bathroom.
TOTO Ultramax II ( Strongest flush) : This toilet features TOTO's proprietary Double Cyclone flushing system that uses two powerful nozzles to create a centrifugal, cyclonic rinsing action, resulting in a strong and efficient flush.
Flushing Systems
Water pumps through a chamber inside the toilet bowl, which builds up enough pressure to forcefully push waste down the drain when you pull the handle. Because commercial toilets typically get a lot more use than residential toilets, they need a more powerful flushing system to handle all the traffic.
The pour-flush toilet requires (much) less water than a traditional cistern flush toilet. However, because a smaller amount of water is used, the pour-flush toilet may clog more easily and thus, require more maintenance. If water is available, this type of toilet is appropriate for both public and private applications.
It could be a blockage, it could be a problem with the flushing mechanics, it could be a water supply problem or it could simply be a broken handle.
Clear a Clogged Toilet
A clog is the most common reason for a toilet that doesn't flush. Clogs can range in severity, from a complete blockage to a partial obstruction. Wipes, toilet paper and other items can build up in sewer lines, which could result in slow flushing that doesn't completely clear the bowl.
But, the rule of thumb is to replace your toilet every 25 years, due to damage and regular wear and tear. If you have an older toilet, you should consider newer model toilets as they will be more efficient in conserving water and utility costs.
Pressure-assisted toilets offer even more flushing power than gravity or dual-flush.
The best pricing may be found at American Standard. They are far less expensive than Toto or Kohler toilets, but their designs are plain and straightforward, with few alternatives. However, if you simply want a conventional toilet with no extra features, American Standard will always be a better option.
The toilet tank fill tube may be damaged or incorrectly positioned, preventing the water level from reaching its proper level. Position the fill tube so water is flowing into the overflow tube (the open pipe near the center of the tank). If this doesn't fix the problem, replace the fill tube.