The proper balance is quickly restored. After large storms, which add 2-3 inches of rain water to your pool, you'll have to add chemicals as needed and wait to make sure they don't adjust too high. Restoring your pool's proper balance will require more than just adding chemicals.
Shocking your pool isn't necessary, although, it's not a bad idea either. If you get an extremely heavy rain fall, you could shock your pool for good measure. This will help fight off any contaminants that the rain may have brought to your pool.
Answer: It should not matter much. It could help to filter debris and contaminants the rain washes into the pool. However, lightning can be a concern with the filter running.
"Heavy rain dilutes pool chemicals, especially salt and chlorine, which causes the pool to turn green. This means the water is not sanitised or healthy, so it's vital to address this.
Rainwater itself does not cause algae, but it can provide the right environment for algae. Rain will bring phosphates, nitrates and other organic contaminants into the pool. As we discussed earlier, rain also reduces chlorine levels.
ADD POOL CLARIFIER
The change in your pool water colour means that you have successfully eliminated the algae and can now clean it out of your pool. If your water is still green, wait another 24 hours and redo the steps from Days 1 and 2.
Yes, pumps are made to function outside and will get wet from the weather with no real problems. There is a problem, however, when poor drainage causes standing water from storms to linger around the motor. In short, the motor is not made to function sitting in a puddle of water.
When rainwater and 'run off' enter the pool, they can change your water's pH, calcium hardness, total dissolved solids (TDS), alkalinity and other chemical levels as well as bring contaminants (e.g. debris, dirt) into the pool.
Remember, rain is acidic. Hence, pool overflowing from rain causes the Alkalinity and pH levels to lower. Very low pH causes pool water to turn very clear and acidic, which destroys your pool surface and equipment.
If you let the water overflow, rather than draining it, you will lose less chemicals. When you leave the water to overflow it is losing the water when the chemicals are the most diluted. This means you lose less and save yourself money replacing them.
Baking Soda and Green, Blue, or Yellow Algae
You'll need to use an algaecide to kill the algae and superchlorinate your pool to clear the water. After this treatment, test your pH and alkalinity and add baking soda to raise alkalinity to at least 100 ppm and pH to between 7.2 and 7.8.
In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done. But, the amounts may vary and you may have to really pound the pool with chlorine to get the water totally clear.
What's important for you to know: You shouldn't swim in a pool that's green until you test the chemical levels, like the officials in Rio did before the diving event began. It's the balance of things like chlorine, pH, and alkalinity in a pool that keeps it sterilized.
So if the pool water isn't cloudy and the 'dirt' is clinging to the walls after brushing, the problem is likely be yellow/mustard algae. Yellow/ Mustard algae is very resistant to even high chlorine levels and will grow and thrive in a chemically well-balanced pool.
The most common reason pool water turns green is due to algae growing in the water. Algae can grow rapidly, particularly in hot weather, which is why it can surprise you overnight during the warmer months. This generally comes down to an imbalance or lack of chlorine in the water.
Pool Clarifiers Coagulate Small Particles
In The Swim pool water clarifiers work by causing fine debris particles to coagulate into larger particles which can then be removed from the pool water through the pool filter system.
The solution to maintaining a clear pool is to use readily available liquid bleach as your chlorine source. Chlorine bleach, as discussed above, is not bound to a stabilizer, so when you add chlorine bleach to the pool, it will go right to work killing microbes and sanitizing.
Just like you run vinegar through your coffee pot to get rid of calcium buildup, white vinegar can wipe away this eyesore in your pool. Mix a 50/50 solution of vinegar and water, dip a sponge or soft cloth into it, and scrub that residue away.