For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.
Although inflatable pools don't need to use chlorine, it's one of the most common ways to keep pool water sanitary and safe to swim in. The chlorine is used to efficiently kill bacteria in the water that may be harmful to swimmers. Larger inflatable pools will benefit the most from the use of chlorine.
Not only for keeping the water germ-free and swimmers safe, but also to preserve the swimming pool itself. Balanced water is gentle on pool surfaces and accessories, while unbalanced water is corrosive and breaks them down faster. This is why adding chemicals to your Intex swimming pool is so important.
Your filter pump circulates the water, evenly distributing sanitizer and other chemicals while cleaning the water. Run your filter pump for at least 12 hours a day, every day. This will make sure all the water in your pool circulates at least once.
You should cover your pool every night for several reasons. First off, a pool cover saves energy and conserves water by decreasing the amount of make-up water. Also, it reduces the consumption of chemicals, and finally, it saves a lot of cleaning time since it keeps the debris out of the pool.
When preparing your pool for a storm, leave it uncovered. Installing any kind of cover across the pool will not do much to protect against dust and contaminants because storms often bring strong winds and heavy rain that can cause the cover to lift off your pool.
The best rule of thumb for pool owners trying to estimate how many tablets to add is this: Add one tablet for every 5,000 gallons of water and always round up. For example, if your pool has 21,000 gallons of water, add five tablets per week. If it has 8,000 gallons, use two tablets.
Every 10 to 14 days will be okay. But, other exceptions will force you to change the water often. For instance, for pools that you don't sanitize with bleach to kill germs and bacteria, drain the pool daily. Note: Stagnant water that has no chlorine will be unhealthy within 24 to 48 hours.
Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.
The most important factor though is the size of the pool. You'll need about 52-104 oz of liquid chlorine per 10,000 gallons of water. This amount should get the chlorine level to between 5 and 10 ppm.
Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you'll only be adding liquid chlorine, it's generally safe to swim after about 4 hours or until levels are 5 ppm or lower.
Drain and refill the pool
If your kid's pool is pretty small, and draining and refilling it doesn't feel like a colossal waste of water, then the best way to keep the kiddie pool clean is to drain it when the water's dirty, scrub it down with a plain old kitchen brush and some mild dish soap, and refill it.
Do i fill the whole thing up till filled with tablets? or do i stick one tablet in for a 10ft summer wave pool. thanks:-) Answer: One tablet is all you need.
Use 1-3 tablets at a time, depending on your pool size. You'll need enough to establish and maintain proper chlorine levels. Small Intex pools under 12′ in diameter should use 2-4 of the 1″ tablets in a chlorine floater. In addition to everyday chlorination of your Intex pool, you may have heard of shocking the pool.
Remember, NEVER disperse chlorine granules or tablets directly into the water. This is dangerous to swimmers' health and will absolutely result in concentrations of chlorine that will damage your pool.
You can swim with chlorine tablets in the pool if the chlorine tablets are in a container. Getting in touch with those tablets can cause rashes, irritation and eye problems. However, to be in a safe zone it will be better if you wait for 3 to 5 hours till the chlorine levels touch 4 to 6 ppm.
But large quantities of precipitation combined with an overflowing pool and poor drainage can cause problems such as flooding, structural damage to the surrounding buildings as well as out of balance swimming pool water chemistry. No fun.
The size of your pool, the efficiency of your pump and filter, and how dirty your pool is are just some of the factors you need to consider. Nevertheless, most pool cleaning professionals would advise against running a pool pump for more than 8 hours a day.
Heavy rains will deplete many of the chemistry levels in your pool. Generally your alkalinity will drop significantly. It is a good idea to have Alkalinity, Muriatic Acid, Chlorine (or Salt), and Shock on hand to be able to test your water and treat your pool immediately after the rain stops.
So while a solar cover won't actually 'turn your pool green', it will warm your water by up to 8 degrees, so if the other conditions are right, adding a solar cover can easily accelerate algae growth, very rapidly. You need to get the water balance in your pool right before putting the cover back on.