You can use Drano® Clog Removers to unclog a kitchen sink, bathroom sink, shower or clogged bathtub, but DO NOT use them in toilets. For clogged or slow-running drains, apply the product and let it work 15 minutes, then flush with hot water. For tough problems, allow 30 minutes before flushing.
When Drano won't go down the drain, grab a plunger instead. Many people think that these are only good for toilets. However, they can create suction that can dislodge your clog. Make sure that you get a plunger that can seal all the way around your drain.
When Drano is left in the drain for too long, it can cause corrosion of the pipes. The chemicals in the product are designed to break own the clog, but if left for too long, they can start to break down the pipes themselves.
Drano® Liquid Drain Cleaner starts working to unclog your drain on contact. After 15 to 30 minutes, clogs are substantially minimized or dissolved. A final blast of hot water flushes away what's left of the clog.
While Drano may work to clear a clogged sink, it may only act as a temporary fix if there are more serious problems with your plumbing. If you notice that you are repeatedly encountering clogs in the same area of your home, then it is likely that you have a plumbing issue more serious that can be addressed by Drano.
The chemicals in Drano may not solve all clogs, and they can lead to a worsening of pipe issues. Drano can build up in a clogged area, and corrode the pipe. With repeated use, these chemicals may eat their way through a pipe, and cause a leak or a collapse of the system.
A lot of folks know the baking soda and vinegar trick. Simply pour some hot water down your clogged drain and follow it up with equal parts baking soda and vinegar (baking soda first), cover the drain with a plug if you have one, let it sit for 20-30 minutes, then follow it up with more hot water to clear the clog.
Does this particular clog seem bust-up proof? If standing water remains, use Drano® Max Gel Clog Remover. It pours straight through the water and attacks the clog directly.
The harmful chemicals in Drano can end up being corrosive to your pipes. Drano has been known to cause toilet bowls to crack, soften and break PVC pipes and break older corroded pipes. Over time, the continued usage of Drano can lead your pipes to corrode, crack and eventually fail.
If you're using Drano with other plumbing equipment like a plunger, the liquid can easily splash up out of the sink and burn your skin, eyes, and lungs.
Using a snake is also more invasive and time-consuming than using a chemical cleaner is, and can often become a dirty job. When it comes to getting at and removing major clogs or clogs that are deep down in your pipes, however, a plumber's snake is your best bet.
Chemicals are Hard on Plumbing
Additionally, when used in toilets, Drano can end up sitting in the bowl for a while and may seep into the porcelain causing cracks or even explosions, in the most extreme cases. Occasional use is okay, but repeated use can lead to much deeper problems than a clog.
Single Use, Not Frequent Use
Because of the chemicals found in these types of products, you could cause irreparable damage to your pipes. In most cases, a single use of Liquid-Plumr or Drano will not cause any issues with your pipes, though you should avoid using them in your toilet.
Yes, the heat these chemicals produce will break down the remnants of a clog, but likely only push them farther down your system to form a more dense clog in a harder-to-reach section of your plumbing. This leads to repeat clog offenses, repeat pouring, and the eventual ruin of your plumbing system.
If Drano does not clear the toilet, this heat can crack the porcelain, soften PVC pipes and dissolve old, corroded pipes. It can hurt you—If you try using a plunger after the Drano does not work, some of it may splash on you, burning your skin.
Simmons says these products are corrosive to pipes. “If used repeatedly, they can cause your pipes to burst, leaving you with a much larger problem,” she adds. “Don't use Drano or similar products. Call your landlord or super.”
Not only will it not fix your clog, but it will actually make it worse. Over time, drano can harden and become like cement. This will eventually require much more expensive repairs. It is recommended to use a camera and a snake to attack the cause of the clog.
Some of the best Drano alternatives include using a plunger or pipe snake, soap or salt mixed with boiling water, or baking soda and white vinegar. Also, for maximum effectiveness, you can combine several of these methods together to get rid of the clog.
Baking Soda and Vinegar
We suggest that you mix 1/3 of a cup of baking soda with 1/3rd of a cup of vinegar to create your drain unblocking remedy. When mixing the two ingredients, they should start to fizz straight away so you should waste no time pouring the concoction straight down your sink.
If it's an indoor blockage, it could have occurred because of heavy materials or objects being flushed down the drain. Overflowing drains are often caused by sanitary products, paper towels or other hard to flush materials which can clog pipes and obstruct drains. Wipes, tissues, and even hair can also be the culprits.
Mix 1/3rd of a cup of bicarbonate of soda with 1/3rd of a cup of vinegar in a measuring cup. It will fizz immediately, and you should waste no time pouring it down the clogged drain. The fizzing action will help to remove the gunk, hair, and grime that has built up in the pipe.
Allow to work for 15 minutes. For tough problems, allow 30 minutes.
This may happen when a partially dissolved clog gets lodged further down the pipe. We recommend trying another bottle of this product. However, if the problem continues to persist, you should call a plumber, as there are some plumbing situations that even Liquid-Plumr cannot fix.
It works great to remove hair, soap scum, and other gunky clogs. Conquer tough clogs whenever they happen.