First, you will need to sweep off the area you'll be cleaning. Remove any weeds and moss growing between paver cracks. Follow the directions on the container of ultra-concentrated oxygen bleach and stir in instructed amount of bleach powder and warm water in the large bucket. Next, pour the solution onto the paver.
If your deck is made from concrete, pavers travertine, brick, stamped concrete or composite decking, you can clean and refresh it for summer using OxiClean™ Versatile Stain Remover.
You can use oxy bleach to clean brick. It's great to clean brick, with two tablespoons to a gallon of hot water, and you sponge it on or brush it on let it sit for about 20 minutes and rinse it away. You can use it on the fireplace, obviously, which could get a little messy throw a towel down if you're gonna do that.
You may also use Oxyclean mixed 4 scoops to a gallon of hot water. Let soak for 15 minutes and then scrub with a nylon bristle brush, then rinse. Caulking - Scrape off excess and scrub with a poultice of denatured alcohol. Rinse with hot water and detergent.
Similar to cleaning pavers with muriatic acid, avoid an intense concentration of bleach, as it can damage the pavers.
Generally, interior pavers that have been grouted and sealed just need to be swept, mopped, and spot-cleaned as needed with a gentle, non-acidic multipurpose cleaning solution, such as Enviro Klean All Surface Cleaner or Light Duty Concrete Cleaner.
The pressure washer in combination with a dirt cutter is an excellent option. This removes not only weeds and moss from the surface, but also from indentations. Keeping up with this type of cleaning means that there is less time for weeds to grow. It also helps to maintain the beauty of the paving stones' surface.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
Use Vinegar or Bleach
If you are going to try this approach to remove mold or algae, first try a mixture of white vinegar and water to spray down the area and kill the mold.
While oxygen bleach is safe on most fabrics, it should never be used on silk, wool, or any garment that has leather trim or wooden buttons.
For tougher dirt, you can dilute oxygen bleach with water to form a thick consistency and put it in the stained areas. Let it sit for about an hour. You can scrub the areas using a stiff nylon-bristle brush. Using a hose or a bucket, rinse the areas using plenty of water.
Oxygen bleach, aka color-safe bleach or non-chlorine bleach, comes in both powder and liquid forms. Like chlorine bleach, it removes stains but is gentle on fabrics, when used as directed. With its active ingredient of hydrogen peroxide, oxygen bleach works by slowly breaking down stains and then dissolving away.
OXICLEAN: The concrete cleaner solution for your toughest cleaning jobs. We provide a superior outdoor cleaning product that is safe for your vinyl, aluminum, roof, car, wood, brick, carpet, and other common material needs.
If you are prepared to use chemicals to remove algae, lichen and moss from your pavers, it is important that you use plastic sheeting to protect other plants in the vicinity. A solution of one cup bleach to four litres of water should do the trick.
White vinegar is good for cleaning pavers, though it's also acidic enough to erode the stones' surface. Diluted vinegar can be used safely to clean paving stones, though it should be used sparingly and infrequently to protect your paving from damage.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Simple Green is one of the best cleaning products for dirty pavers. It doesn't have any harmful chemicals that could possibly warp your precious driveway. Less chemicals mean there's a less likely chance your paver stones will change to a weird-looking color.
Regular Soap and Water
A solution of regular dishwashing soap or hand soap is simple to create, and it will remove mild to moderate dirt, stains, and grease. Just mix your soap and some warm water in a large bucket and you're ready to start cleaning.
Mild detergent and water. If your pavers aren't too dirty, this can be a quick and easy way to clean them without any fancy equipment. Mix some mild dish soap with water in a bucket to create suds, then use a brush or a sponge to scrub the surface of the pavers.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
Oxygen bleach Oxygen bleach (like OxiClean) is an alternative to chlorine bleach, and it's safe for many fabrics. You can use it to remove stains on colors, as well as whites. It doesn't contain scary chemicals and it won't ruin most fabrics—though you should avoid using it on silk or leather.
Oxygenated bleach can kill bacteria and brighten and whiten clothes, just like chlorine bleach but without the toxic drawbacks of traditional bleach. No more worries about burning your skin, ruining your clothing, or damaging surfaces; it also doesn't have that chemical smell of liquid bleach.