How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
To get the measurements, measure the width of the rod from left to right. For instance, if your window measures 72” wide, you will need curtains that will give a maximum width of 144” (window width x 2 = 144”.)
Keep in mind that the width measurement is flat. If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.
For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.
Example: If your window measures 36″ wide (window width x 2 = 72″), you need curtains that will give a minimum width of 72″ or 2 panels for that window. In this case 2 panels will give about 100″ to 120″ of width which will look nice and full.
While fashion once dictated a “flood level” bottom line for curtains—one that hung just past the window sill, short enough that it would not get wet in a flood—today, style calls for curtains to either hang down to within ½-inch of the floor or even puddle slightly.
You should choose the width that most closely matches the size of your track or pole. The width measurement actually refers to the width of each curtain in the pair, as you need double the width of your track or pole in curtaining for the gathered effect.
For a 120-inch window, how wide should curtains be? Depending on the weight of the fabric and how much you want the curtains to be. At least a width and a half is what I would recommend. 180 inches is the width of each curtain.
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more - sheers can be 3 times the window width) to achieve a look of proper fullness.
Following the rule of thumb, curtains for a 96-inch window should range between 192 and 240 inches wide. To get a fuller look, aim for 288 inches wide.
In the US, the standard curtain width would be 54”. But generally, it ranges from 50-58”. Some curtain manufacturers even go for as long as 108”. Again, knowing the curtain width is as essential as the length because you have to align it with standard curtain sizes.
For example, if the window is 100 inches wide, the curtains should be made to 125 inches wide in order for them to hang off the window when in the open position. For an inside-mount curtain, measure from one edge inside the frame to the inside edge on the opposite side.
How High to Hang Curtains. A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window's inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window's frame.
It is normal for curtains to touch the floor. Some styles even need more length to produce a certain look. Using any of the curtain length styles is fine as long as it enhances the beauty of your home.
So should curtains touch the floor? The short answer is yes... usually. But when making any decision about your window treatments, whether they're drapes, blinds, or shades, it's important to consider every aspect of style and function so you can choose the best option for your windows and your home.
Measure the exact size of the area you would like the Wave curtains to overlap. To minimize light leakage we recommend that you overlap the window recess by at least 150mm at the top and 150mm each side.
Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge. If there is a window frame, blinds or shades on the window, you will want the spacing to clear what is behind the rod.
I would attach a thin piece of ribbon between each pair of grommets that allow the pleat to be the space that you need. Use the same length of ribbon on all of them. Then when you close the curtain all the pleats will be the same space.
Grommets are very similar to eyelets, because they are used to reinforce a hole as well; however, grommets are typically used for more heavy duty material than eyelets. They may also be used to protect an apparatus from the sharp edges of the hole, to prevent damage to the gadget.
Yes, They should! The length of the curtain determines the height of the curtain rod. Therefore, even if you buy curtains that are 84 inches long, if the curtains hang from the rod without rings, the rod must be approximately 84 inches from the floor to enable the curtain to touch the floor and avoid the awkward look.
As you're ordering curtain panels, measure your window. You typically want curtains that are pleated down from fabric that is 2 1/2 times the width of your window.
Above the sill
As the sill is always visible, it's important that the gap between the curtain and the sill remains uniform at every point, so if you've an older property with an uneven window sill, this curtain drop would not be suitable.
For a 9 foot ceiling, pick 96-inch curtains. Typically, your curtain rod is hung about a foot from the ceiling. 96 inches covers the distance between the floor up to one foot from the ceiling.