Remove staining material with blotting, pressing the surface gently with clean paper towel until you don't see oil lifting off anymore. Next, treat the surface with an enzyme cleaner (Bac-Out and Puracy are great choices) and leave it for at least an hour, but up to overnight.
Pretreat with a stain remover or liquid laundry detergent and let sit for several minutes. Rinse well. Wash as recommended according to the garment label. Don't put in the dryer until the stain is gone!
Spray directly into the spot or stain until saturated. Let stand for 5 minutes or up to a week depending on the severity of the stain. For fabrics that are prone to color change, do not let stand longer than 5 minutes.
By comparison, OxiClean suggests that you don't leave it on a garment for more than six hours, because it can start to damage the fabric. One should still be careful not to use the product on dry-clean-only clothing, but if you're doing laundry late at night, leaving Shout on a stain overnight is a risk-free treatment.
Letting the stain remover sit too long.
Ironically, some stain removers can cause more damage to fabric if they're left to sit on a stain. Make sure to read and follow instructions, particularly when it comes to how long the stain remover should treat a stain.
Step Two: I let the clothes soak in the OxiClean for about 8 hours (6 hours is recommended but I just let mine soak overnight). Note: I literally let these SOAK.
Yes! Vanish is capable of removing old stains as well as new stains.
Leave it there overnight. As the carpet dries, any stain residue will travel out of the carpet and into the paper towel. In the morning, remove the pot, toss the paper towel, and fluff the carpet to finish drying. Meanwhile, If you're looking for a new stain remover, check out these fast and easy carpet stain removers.
Gently rub your stain-removing paste onto the stain with a clean cloth. Let the paste work on the stain for 10 minutes. Wipe away the residue with a damp cloth.
Step 2: Apply a carpet stain remover.
No matter which carpet cleaner you use, take care not to over-wet the stain, which can damage the backing. Let sit for 10 minutes.
Sadly, there is no one-size-fits-all stain remover, so that's why we always ask that you share as much information as possible at drop off. There are some stains that are incredibly stubborn, but place that stain on a delicate fabric, then it becomes even more challenging and sometimes impossible to remove.
It's not difficult to use, all you've got to do is pour or brush the wood stain remover onto the surface and wait for a couple of minutes. Once it's done, proceed to scrape off the layers, wipe away with a cloth, and you're done.
With staining, you'll know if you've over-applied your deck stain because there will be sticky patches or puddles that just aren't drying—the wood has absorbed all it can, so the remaining stain has nowhere to go.
Using too much stain remover
Using too much can make the area harder to rinse or dry, especially on carpets and upholstery. Light, repeated applications of a remover work much better than flooding a stain.
Old Stains There is often the effect of time upon a stain: the older the stain, the harder it is to remove. Drycleaners who are trained in stain removal prefer to work on fresh stains which have not had time to "set" or react with the fabric, dyes, finish, or atmosphere.
Have you noticed the carpet turning yellow after cleaning? This occurs when you clean your carpet with substances that have a high pH level or are alkaline. In this case, use an acid-based carpet cleaning solution to reverse the effect.
Shout Advanced Stain Remover for Clothes with Scrubber Brush
It's no surprise that two products with built-in applicator brushes — our best overall pick from Carbona and this product from Shout — earned the top two spots in our stain-removing tests with both showing similar results in the Lab.
Greasy / Oil Stains – such as hand lotion, hair mousse, lard and butter. Oxidisable Stains – key ingredient in alcoholic drinks, coffee and tea (without milk) and soft drinks. Particulate Stains – such as mud and ground in dirt. Combination Stains – these stains can be a mix of two or more of the above stain types.
Submerge stained items in solution after dissolved. SOAK 1-6 hours depending on severity of stain, some stains may require more time to soak. For best results, soak for 6 hours. WASH as normal with detergent and OxiClean™ Versatile Stain Remover.
When mixing powdered oxygen bleach with water to create a stain-removal solution, use warm water to ensure that all the powder dissolves. Once dissolved, add cold water to cover the fabric if needed. Completely submerge the stained garment, and allow it to soak as long as possible—up to eight hours or overnight.
Pre-soaking helps the stains to come lose and be removed more easily. Simply fill your washing machine, bucket or tub with warm water and then add your detergent and clothes. Allow the items to soak overnight for optimal results.
Diluted vinegar can dissolve the finish that protects the wood and leave it looking cloudy, dull, or scratched. (The same goes for wood furniture.)