Fill the pool, and add the bleach and borax. Wait an hour, then use the strips to test. The chlorine level should be 3.0 or higher, and the pH should be 7.4 or higher.
In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done. But, the amounts may vary and you may have to really pound the pool with chlorine to get the water totally clear.
Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.
Baking soda is safe and straightforward to use, while also providing your pool with a clean, clear, sparkling water that is pleasant to swim in. Baking soda does not sting the eyes; neither can it cause drying of the skin.
Cloudy or milky swimming pool water is caused by seven main issues: improper levels of chlorine, imbalanced pH and alkalinity, very high calcium hardness (CH) levels, faulty or clogged filter, early stages of algae, ammonia, and debris.
Skim the top of the pool for debris that may have settled on the pool surface. Add one pound of diluted granular shock to the water for every 7,000 gallons of pool water. Run the filter for 24 hours and retest the water. The slimy looking film can be an early onset of algae.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
Chlorine is added to the water to kill germs. When it is added to a swimming pool, it forms a weak acid called hypochlorous acid that kills bacteria like salmonella and E. coli, as well as germs that cause viruses such as diarrhea and swimmer's ear.
Vinegar contains acetic acid which makes it a great disinfectant. It is also acidic in nature hence removes dirt, grease and mineral deposits. If used in the right amount, its acidic nature also plays a role in lowering the pH of pool water.
Short answer: yes. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you'll need to use less bleach to treat your pool.
Swimming pools need chlorine because chlorine is the only effective way to keep pool water clean. Even a saltwater pools need chlorine (they just generates the chlorine themselves). While there are other methods of cleaning pool water, such as UV or ozone treatment, they are not replacements for chlorine.
In most cases, the walls and floor of your pool feel slimy and slippery due to a lack of pool maintenance. Water chemistry is important in order to maintain clear and bacteria-free water. Generally, slippery and slimy pool walls are an early indication of bacteria and algae growth.
Water Mold is a whitish, mucous-like substance that looks like shredded tissue paper when floating in the water. It is not harmful to humans, but is unsightly, and can clog equipment. Water mold usually begins in the filter lines, and by the time it becomes visible, the growth is often quite heavy.
Swimming pools use chlorine as the main sanitizer. This chemical is responsible for keeping the water free of bacteria, which helps prevent algae and other problems associated with a dirty pool. A film can form on the water from a combination of body oils, lotions, and dirt that build up due to heavy usage.
For the most part, yes. It can be unattractive and it should be addressed, but it is mostly safe to swim in cloudy water. The only exception would be if the pool is cloudy because there are too many chemicals in it. This pool water would be unsafe to swim in and should be avoided.
Baking Soda
Most remedies call for adding additional chlorine into the water. If your water's pH balance is between 7.2 and 7.5, however, you can add baking soda to the water to help clear it up. This serves as a replacement for chlorine because baking soda is a natural cleaning agent.
If you need to mildly shock a 30,000-gallon pool by raising the free chlorine concentration to 5 ppm, you need 2.5 gallons of bleach. To raise it to 10 ppm, you need 5 gallons.