To install a pocket door in an existing wall, you have to remove drywall, and it's easier to uncover the entire wall instead of trying to work in a limited opening. That way, you can remove entire studs instead of cutting them and reroute wires as needed.
If you simply want to replace a pocket door or remove it in order to repair it, you don't have to tear into the drywall! That's great news. All you have to do is lift the door off the sliding track.
You can really have a pocket door installed anywhere you like but normally, such doors are placed in areas where they will be of benefit. If the space provided for a door swing is not optimal, a pocket door will free up space in the home.
A pocket door requires a “sleeve” inside the wall to retract into. For a traditional 32-inch-wide interior door, you'll need at least 66 inches of linear wall space: 32 inches for the door and the rest for the housing.
As long as the measurement is correct for the pocket opening, the door is the right thickness, and the door hasn't been pre-drilled for a standard door lockset or hinges, you can use any kind of door for a pocket door.
Installing the door into the pocket is also fairly easy to do. As with many home improvement jobs, much of the trick is having the proper attitude, taking the time to do the job right and reading the instructions before you get started.
To install a pocket door in an existing wall, you have to remove drywall, and it's easier to uncover the entire wall instead of trying to work in a limited opening. That way, you can remove entire studs instead of cutting them and reroute wires as needed.
To hang a pocket door, you need a rough opening that is twice as wide as the door itself. This means taking down the old swinging door, removing the jamb and disassembling the wall framing. You'll also need to remove drywall and relocate any electrical wires that are in the way.
The reasoning is a 2x4 wall really has no room for framing other than a 1x2 or 1x4. These thin framing members just don't have enough rigidity so the opening can be flimsy. This is most noticeable around the pocket opening where the door sits.
At the very least, pocket doors do require thicker walls. This means an offset of more than 4 inches (100mm) to accommodate doors that have a usual thickness of 2 inches, with a bigger gap required for thicker door choices.
Pocket doors are a great solution for smaller spaces that lack the wall space for a full swing door. This makes them perfect for small bathrooms, closets and connecting those two areas, for example between a master bath and the walk-in closet.
It will cost you between $1,000 and $3,500 to have a pocket door installed in an existing wall. The rate charged by a professional to hang a standard model is $150 to $200.
Pocket doors that are 4 feet wide would require a header that spans the opening of 8 feet, plus another 4 feet on each side where the doors tuck away. It's 16 feet long, heavy, unwieldy and often constructed of two 2-by-10s or more depending on the load above.
A cavity unit is a door designed to effortlessly slide into a pocket in the wall, rather than swing like a hinged door. One of the biggest objectives in building, renovating or even redecorating a house, is to maximise every area. To fully use the space the hinged doors occupy, cavity units are a great solution.
The issue is, I have a door frame and everything already implemented. Does the material of my wall affect the sliding door? What is the best way to implement the sliding door ? Yes, stud wall.
Pocket doors are a good option for smaller rooms that may not have space for a full-swing door. They're perfect for closets, connecting two spaces (for example between an en suite and a walk-in closet, and small bedrooms where floor space counts.
Double the width of the desired door, or pair of doors, to determine the wall space that's needed to install the pocket door frame. For example, 48 inches is needed to install the frame for a 24-inch pocket door, and 64 inches is need to install the frame for a 32-inch pocket door.
Pocket doors are more expensive to install because they usually require construction to a home's structure. Both doors have a nominal cost of $400 for an average 30-inch solid wood door. However, the installation cost of a new barn door is anywhere from $100 to $300 per existing wall.
Yes, you can lock pocket doors to secure specific places in your house. Pocket doors can have a lock on one or both sides. If you want to secure your property, you can choose a pocket door lock with a key. The locks may either be a round or square lock.
The open doorframe should be twice the width of the intended door slab, plus 1 inch. So, the rough opening for a 30-inch door slab should be 61 inches. Height should be the vertical length of the door slab, plus the thickness of the door track and desired clearance (about 1 inch, though product dimensions vary).
The idea is to build the pocket to the same thickness as the studwork – 75mm (3″) or 100mm (4″) which are the two standard studwork sizes generally in use – so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4″) or 125mm (5″).