Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine. Household bleaches often have unwanted fragrances and colors.
You can also simply add more chlorine, and pouring household bleach into the pool is one way to do this. Be sure the pH is in the proper range -- between 7.2 and 7.8 -- and add the bleach in the early evening to avoid having most of it degraded by sunlight.
The solution to maintaining a clear pool is to use readily available liquid bleach as your chlorine source. Chlorine bleach, as discussed above, is not bound to a stabilizer, so when you add chlorine bleach to the pool, it will go right to work killing microbes and sanitizing.
There are alternatives to chlorine including bromine, ionizers, and ozonators, though with each you'll still need to use some chlorine. A fourth alternative is PHMB, which doesn't require the use of any chlorine. All four have drawbacks, including cost.
Chlorine is a natural element and an ingredient of bleach, while bleach is a solution and the product of combining chlorine and other chemicals. 2. Chlorine exists in nature, while bleach is a manufactured product.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
Clorox outdoor bleach has additives, a thickener and "metal protection". Neither are things you are likely to want in the pool. I suggest you stick with the Clorox regular or a generic bleach without added features.
High concentrations of chlorine (above 1.5 ppm) will attack the liner and bleach it, thus damaging it. Any level below this range will weaken its ability to kill off bacteria.
What is this? If you need to calculate how much bleach or Clorox you need to shock your pool, you will have to use 1/2 gallon of bleach per 10,000 gallons of water to raise the chlorine levels by 5 ppm.
It is a good idea to wait at least 20 minutes after adding the water balancing chemicals. If you use calcium chloride in your pool, you should wait at least 2 hours to swim.
It is possible use use the tablets in your large wading pool. However, this is not economical and it will take a large amount of tablets to clean your pool. Unless you have a major supply of these tablets on hand, I would not suggest using them to clean a pool.
Green algae, unlike its black counterpart, is a true algae; it isn't resistant to chlorine, so you can control it by shocking the pool. If you don't want to spend a lot of money on expensive pool chemicals, you can shock with household bleach.
Short answer: yes. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you'll need to use less bleach to treat your pool.
The main difference between bleach and chlorine is their strength. Chlorine is much stronger than bleach. To get your pools chlorine level to the point it needs to be to keep the pool looking clean and bright; you will need to use more bleach than you will chlorine.
Both are ideal for scrubbing tough messes, but chlorine bleach is too harsh for use outdoors. While chlorine bleach will work well at ridding your patio of mold and mildew, it will also kill any flowers or grasses it comes in contact with. Bad news if you just planted a garden or fertilized the grass.
It takes a lot of chemicals to make pool water safe for swimming. Untreated water can accumulate harmful Escherichia coli and Salmonella bacteria and protozoans such as Cryptosporidium parvum and Giardia lamblia.
Maintenance is critical when it comes to the quality of your pool water. Well maintained pool water can last up to 5, maybe even seven years before you need to replace it. This means weekly cleaning, functional filters, and checking ph levels every day. Usage is a huge determining factor.
If the chemicals used to kill germs (chlorine or bromine) in pools, hot tubs, and water playgrounds are not kept at the right level, these germs can multiply and make swimmers sick.
*1 gallon of chlorinating liquid delivers the same amount of chlorine as 2 chlorinating tablets.
Well-known member. No! Splashless contains a type of soap as a thickener, and it will make bubbles in your pool, as well as HE washing machines. Don't use splashless bleach.
When chlorinating wading pools, use 1/8 cup per 100 gallons of new water. Mix required amount of Clorox® Regular Bleach2 with 2 gallons of water and scatter over surface of pool. Mix uniformly with pool water. Empty small pools daily.
Finally, if it is not properly dosed, bleach can become dangerous for bathers! Pool water that is too concentrated in bleach can become toxic, irritating the eyes, skin and respiratory tract of swimmers.
Baking Soda and Green, Blue, or Yellow Algae
You'll need to use an algaecide to kill the algae and superchlorinate your pool to clear the water. After this treatment, test your pH and alkalinity and add baking soda to raise alkalinity to at least 100 ppm and pH to between 7.2 and 7.8.
Of course, too much chlorine in pool water can be dangerous. Exposure to over-chlorination can provoke asthma, lung irritation, and potentially skin and eye irritation. As well as being potentially bad for you, it's bad for your pool.