In most homes, the best wood floor cleaner is plain old soap and water, and the only tools you need are a broom, vacuum, and mop. The best mop for wood floors is a microfiber flat-head or string mop you can easily wring out.
Sweep or vacuum, then mop with a commercial wood floor cleaner or solution of a quarter-cup of dish soap and a gallon of warm water to lift any lingering grime. Give the floors a final pass with a clean, water-dampened mop to remove any cleaner residue. Dry completely with a soft, clean towel.
Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.
Vinegar, ammonia, or other alkaline products
These may be a great option for tile or vinyl flooring, but ammonia, vinegar or similar solutions – even when diluted – are too harsh to clean your wood floors with. Over time, these solutions can strip away the finish exposing the bare wood of your flooring.
Water You Using to Clean Your Floors? You can safely use Swiffer products on hardwood floors. For a quick clean, try Swiffer WetJet Wood Starter Kit. With just the right amount of solution, it breaks up tough, sticky messes, brings out the natural beauty of your floors and won't damage them.
An alternative natural cleaning solution is warm water and dish soap (1/4 cup of dish washing liquid for a bucket of warm water). For spot cleaning needs, sprinkle baking soda on the affected area and scrub with a sponge. To ensure the area is thoroughly clean, rinse with warm water and dry.
Pine-Sol is safe on hardwood floors and can be used to clean and disinfect them. What is essential is to use the right concentration and correctly follow the instructions: Sweep or vacuum the floor to remove loose dirt and debris. Take ¼ cup of Pine-Sol and mix with a gallon of water in a bucket.
For heavier cleaning and to restore a durable shine, use a regular microfiber mop and gentle cleaner specifically designed for finished wood floors, such as Murphy® Oil Soap.
Murphy Oil Soap is safe to use on all finished hardwood floors, ceramic tile, laminate, and vinyl floors. With It's 98% natural ingredients, it won't harm them but extend their life by using it on regular basis. You just need to rinse your mop thoroughly before cleaning.
Mix a one-to-one ratio of water and vinegar, dampen a cloth, and rub off the hazy buildups. Rinse with another cloth dampened with clear water and dry the floor immediately with a third rag. Washing coupled with wear and tear can eventually make the hardwood floor look old and cloudy.
Bona products are specially designed to protect floors and the environment. Bona cleaners won't dull your floors or leave behind any residue.
MOP & GLO Multi-Surface Floor Cleaner is safe to use on a variety of different floor surfaces, including tile, vinyl, hardwood, marble, linoleum, ceramic, and no-wax floors.
Floor cleaner: Fill a bucket with hot water, add 1 cup of white vinegar and 1 drop of liquid dish soap or Murphy Oil Soap.
Once a week, wood floors should be cleaned in high traffic areas with a damp mop. Low traffic areas can be done less frequently, like once a month or once a quarter. Unsealed wood floors are more susceptible to water, so make sure that the mop is just slightly damp.
The good thing about the fabuloso cleaner is that it can be generally used for all the wood floor surfaces. It is a good multi-purpose cleaner of which you can practically use to effectively clean the floor surfaces around your home.
Usually no rinsing required. On wood surfaces, do not allow puddles of cleaner to remain. *Not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn flooring.
Why Laundry Detergent isn't appropriate for floors
pH: The alkalis in laundry detergent are too strong for your floors. If you have hardwood floors, luxury vinyl plank, or tile, your floors will prefer a neutral pH cleaner.
Clean wood floors with vinegar by adding 1/2 cup white vinegar to a gallon of lukewarm water. Follow the tips for how to clean hardwood floors with a mop, above, to prevent water damage. Then use vinegar to naturally clean the rest of your home!
Dampen a mop with solution of water and white vinegar and rub over the spots and leave it for some hours before you vacuum. You can as well sprinkle baking soda on the smelling spots and vacuum after an overnight.
Disinfect Regularly.
For a general cleaning, you can use a product like Murphy® Oil Soap, which is safe for use on wood surfaces. Once you've cleaned the surface, it's time to disinfect, by attacking germs with a spray solution of water and white vinegar.
Wood floors look fabulous instantly when you use Orange Glo. Orange Glo leaves a build-up of dirt or residue on wood floors.
Helps protect against everyday scratches. Mop & Glo Multi-Surface Floor Cleaner with shine lock formula gives you the beautiful floors you deserve in one quick and convenient step. Contains no phosphorus. Types of floors: Safe to use on tile, laminate, vinyl, hardwood, marble, linoleum, ceramic, and no wax floors.
Do NOT clean your floors with Murphy's Oil Soap, Mop and Glo, Orange Glo, Swiffer Wet Mop, furniture polish such as Pledge, vinegar, ammonia, or any pine cleaners! All of these cleaners, over time, will dull and damage the finish.