An environmentally more benign refrigerant for replacing refrigerant R410A includes a majority portion of refrigerant R32 and a minority portion of refrigerant R134a, the volumetric capacity of the replacement refrigerant permitting it to be used as a near or exact drop-in replacement for refrigerant R410A in terms of ...
The replacements for R-410A are the two A2Ls, Forane® R-32 and R-454B.
It is observed that R410A has lower surface tension, liquid density and viscosity but higher saturated vapor density and viscosity than R134a.
Yes you can use a R134a gauge to measure the PSI to charge R410a refrigerant. But that being said, your R134a gauges will have a maximum reading, if the PSI goes beyond that, it could damage the gauge.
R134 was specifically designed to replace R12 used in smaller air conditioning units, such as those used in vehicles. R134 is also used in home appliances, mobile refrigeration units and stationary commercial units, such as cold cases in grocery stores.
An environmentally more benign refrigerant for replacing refrigerant R410A includes a majority portion of refrigerant R32 and a minority portion of refrigerant R134a, the volumetric capacity of the replacement refrigerant permitting it to be used as a near or exact drop-in replacement for refrigerant R410A in terms of ...
R134a is a potent greenhouse gas and therefore has 1,430 times the warming potential of carbon dioxide. As a result, lower GWP and eco-friendly refrigerant options are already replacing R134a across many industries. New vehicles sold in the United States after 2021 can't use R134 in their air conditioners.
In December 2022, the EPA unveiled a refrigerant ban that will go into effect between 2025 and 2026 (depending on the industry). The result? R-410A is out, shaking up the HVACR industry, which relies heavily on this refrigerant.
There are three refrigerants that can be used to replace R-134a: R-1234yf, R-152a, and R-744. More on these replacements later.
R-410 refrigerant costs $60 per pound on average, but can range from $40 to $75. Keep in mind you cannot purchase R-410A refrigerant without an HVAC pro. As of mid-2024, R-410A refrigerant prices range from $40 to $75 per pound.
The same two refrigerants and 19 others are being listed as unacceptable in new cold storage warehouses from January 1, 2023. The banning of R134a, along with 27 other refrigerants, in new domestic refrigerators and freezers from January 1, 2021, is expected to open the way for the use of hydrocarbon refrigerants.
A small amount of R 22 left in a 410A system will not sludge the oil. This is because most POE oils are mixable (meaning they mix well) with any refrigerant even R 22.
Systems installed in 2010 or before likely have R-22 refrigerant. Systems installed between 2010 and 2023 probably use R-410A, Puron, or an equivalent, non-ozone depleting refrigerant. If your system was installed in 2024 or beyond, it will likely use Puron Advance, also known as R-454B.
RS-53 (R470A) enables users to replace R410A in existing units with minimal changes and inconvenience at low cost.
R-410A PHASE-DOWN TIMELINE
In 2024, we will jump to a 40% decrease in production. We will reach a 70% decrease by 2029. In 2034, we will see 80% less R-410A being produced than it is today, and the phase-down will end in 2036 with another 5% reduction.
R32, R452B, and R454B replacements for R410A are all classed as 2L: mildly flammable. These A2L refrigerants offer only moderate limitations in charge for direct expansion systems and no limitations for indirect expansion systems such as chillers, when located outdoor or in technical rooms.
The restriction of HFC-134a will occur under a broader prohibition of any substances with a Global Warming Potential (GWP) higher than 150 in the MVAC sector. HFC-134a will no longer be allowed in nonroad vehicles as of January 1, 2028.
In the United States, vehicles produced after 2021 no longer contain R-134A in the air conditioning system. In other parts of the world, including the United States, there are restrictions around using 1,1,1,2-tetrafluoroethane. Specifically, in California, retailers can deny selling customers canned R-134a.
No, the compressor will fail. These two refrigerants have very different properties. One of R22 and R134a is high pressure and the other is low pressure. They don't mix chemically and don't have the same boiling point, leading to inefficiencies and eventual compressor failure.
What is the replacement for R-410A? A lower GWP replacement for R-410A is Forane® R-32. Forane® 32 is a stand-alone third generation refrigerant for new residential and light commercial air conditioning systems, heat pumps and other HVAC applications.
ComStar's RS-53 (R470A) is the world's only drop-in retrofit replacement for existing R410a systems. At 909, RS-53 has a GWP that is effectively 56% lower than R410a. Additionally, RS-51 (R470B) has a GWP of 717 which is 80% lower than R404a, R507 and half of R448A and R449A.
What refrigerant will replace R-410A in 2025? For whole-home systems, Lennox has chosen 2025 Compliant Refrigerant R-454B due to its excellent performance for ducted systems and zero ozone depletion potential. For mini-splits, we selected R-32, designed to optimize efficiency and reliability in ductless systems.
A High-Performing Alternative to R-134a
Opteon™ XL10 (R-1234yf) refrigerant is a non-ozone depleting (ODP) hydrofluoroolefin (HFO) option that meets the industry's growing demands for sustainable, safe, and effective solutions.
The AIM Act is a Federal nationwide rule phasing out the use of global warming materials. As part of that effort, EPA is now banning the use of 134a in aerosol products as of 1/1/2025. There are excepted products that are allowed to use 134a until 1/1/2028.
Still, the answer is an emphatic, “No.” Not only would a retrofit of this type negate the environmental benefits of R-1234yf, but it would also be a violation of Federal Law under Section 203 of the Clean Air Act: “tampering” with a vehicle's emissions control device.