Pressure washing is one of the fastest, most effective ways to get your concrete white again. Concrete can change color over time due to pollen, algae, or dirt buildup, but a good pressure wash can easily remove dirt and stains and make your concrete look new again.
Bleach is commonly used to whiten concrete and is very effective at doing so if the initial stain is removed beforehand. Bleaching stained concrete white prepares it for any additional coloring treatments that you may wish to apply in the future.
A quick answer is yes! White vinegar can clean concrete and remove stains. It may not be as powerful as concrete cleaners, but it can clean up concrete stains on a budget.
Add 2 ⅔ cups Clorox® Outdoor Bleach to the pump sprayer and then add 13 ⅓ cups water to make 1 gallon of bleach solution. Wear gloves, safety glasses and clothing that you don't mind accidentally splashing with bleach solution.
Restaining works best if you need to go darker or fill in light spots, but does not work very well when you're trying to lighten the overall color. If the desire is to lighten the color, the best results I have seen come from pulling some of the initial stain out of the concrete.
Discoloration in later life can result from atmospheric or organic coloring; the concrete is just dirty. This type of discoloration is usually removed by high-pressure washing with high-pressure water and, if necessary, chemical cleaning agents. The use of calcium chloride on concrete can discolor the surface.
Liquid peroxide formulas clean and brighten grout lines without harsh acids and chlorine bleaches that can damage the grout and surrounding flooring materials. The Liquid peroxide cleans, refreshes, and brightens concrete, tile, and grout without leaving watermarks or residue in contrast to other cleaning chemicals.
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
Vinegar or baking soda: These natural cleaners work well to clean cement patios with stubborn charcoal or rust spots. Mix equal parts vinegar and water, scrub the patio with the mixture, then give it a good rinse. If stains don't dissolve, try undiluted vinegar.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
Cleaning concrete with muriatic acid can be a highly effective solution if used correctly, providing ultra-bright white concrete and removal of many types of stains. In one application, you can remove rust stains, oil stains, algae, and paint splatter with a quick chemical application followed by pressure washing.
Mix equal parts water and vinegar and apply it to concrete. If this stain removal technique doesn't work, use 100% vinegar and scrub stains out. This solution can work on many surfaces, including car seats and hardwood floors.
The 1600-WHITE series of water-based, white-pigmented concrete curing compounds are wax-based dispersions with selected white pigments. When properly applied, 1600-WHITE forms a premium-grade membrane, which optimizes water retention.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue. OxiClean is the cleaner for your toughest cleaning jobs. Clean your home, patio, driveway, and more.
Although the bulk of the hydration process takes place in the hours and days immediately after the pour, concrete needs 28 days to fully dry. While the slab will harden and lighten in color before 28 days, don't be fooled into thinking it's done hydrating.
Cleaning concrete with vinegar or baking soda is a good option if you are looking for a natural cleaner. While cleaning concrete with bleach or detergent can be effective, it can also be toxic to plants.
Mixing vinegar and bleach together releases a poisonous chlorine gas, which can be fatal if inhaled at high enough concentrations.
After disinfection with bleach solutions, surfaces should be rinsed and dried. Bleach can be irritating to skin and mucous membranes, so any residue should be removed prior to returning animals to the environment.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
For most concrete floors, you can use a mixture of flour and hydrogen peroxide or water and trisodium phosphate. But for stamped concrete floors or polished concrete floors, you'll want to use a gentler solution. If your indoor concrete flooring is stamped, use a mop and mix water and a mild cleaner in a bucket.
Grab Hydrogen Peroxide
For a natural, stronger solution to tackle stubborn stains on concrete surfaces, mix flour and hydrogen peroxide into a paste the consistency of peanut butter.
Why is my concrete turning white? Efflorescence is a white salty residue caused when too much moisture is moving through the concrete. As the concrete dries and its moisture rises upwards through the slab, it brings salts within the concrete to the surface as well.
A small amount of acid added to the water will pull the stain out of the concrete without etching the concrete surface. In essence, the acidic solution reverses the reaction, allowing you to pull the color back out of the concrete.
Efflorescence is the white chalky powder that you might find on the surface of a concrete or brick wall. It can be a cosmetic issue, or it can be an indication of moisture intrusion that could lead to major structural and indoor air quality issues.