Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
Yes. When you want to stain or change the color of your hardwood floors, you MUST fully sand and refinish the floors. If you don't sand the floors first, the stain won't properly penetrate the hardwood nor will the polyurethane properly adhere. This is the ONLY way to change the color of your hardwood floors.
Do I have to sand down to bare wood to get rid of them? A: The Editors of This Old House reply: Not necessarily. If the scratches don't go all the way through to the wood, you can scuff-sand your floors with a buffer and apply a fresh coat or two of finish.
Just squirt Reviver on the floor in an "S" pattern and spread a thin, even coat using a damp painter's pad or a synthetic applicator attached to a long handle. Work in small sections, moving in the direction of the floorboards using a back-and-forth motion, until the entire floor is coated. Even the cleanup is easy.
If your hardwood floors have been sanded and finished with Bona Mega Clear HD, it is safe to sleep in the home about 2-3 hours after the project is finished, but again, only if there are other rooms that have not been robbed of their furniture – furniture should stay off floors for at least 24 hours after ANY project ...
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
You can undertake to refinish yourself — but the professional treatment is sure to leave you most satisfied. Resurfacing your floor involves more than just putting a layer of polish on top. It may require removing old floorboards, grinding down uneven boards, and reinforcing wood planks with new nails.
Minwax® PolyShades® is an easy way to change the color of your currently stained or polyurethane finished wood. There's no stripping or heavy sanding necessary to remove the old finish!
There is a clear difference between floor buffing and sanding. Sanding gets rid of damaged polyurethane sealer and part of damaged wood. Sanding involves the restaining of planks and sealing them with a new coat of polyurethane. In contrast, buffing only involves polyurethane sealer and does not touch the wood.
Sweep or vacuum, then mop with a commercial wood floor cleaner or solution of a quarter-cup of dish soap and a gallon of warm water to lift any lingering grime. Give the floors a final pass with a clean, water-dampened mop to remove any cleaner residue. Dry completely with a soft, clean towel.
You may recoat a floor to completely change the color of the finish, to retexture, or to simply reapply the same finish that was already on the floor. It's normal for hardwood floors to be recoated more than once during the life of the hardwood floor.
Let's get started. As a general rule, we recommend leaving your base and shoe on when having your floors refinished, especially if it is painted. Depending on how the painters prepped your base, you can actually cause more damage to the base and walls by removing it.
A solid hardwood plank at least 3/4 inches thick will likely need to be refinished four to six times during its total lifespan. It's commonly accepted that you refinish every seven to ten years. Important note: some hardwood is only 1/4 inches thick. In this case, a refinish could strip away all traces of the floor.
When you refinish your floors, you can change the color of your flooring. Most hardwood floors can be made darker, lighter, redder, or anywhere in between. If your flooring is solid hardwood, it can be sanded and refinished in a different stain for a different appearance.
Staining on top of older stain is perfectly fine. You will need to understand your specific project and plan before you begin but staining on top of old stain is fairly simple. As we mentioned earlier, staining on top of old stain works best if you want a darker stain.
Stain over varnished wood without sanding is not recommended. Because staining should do after sanding the wood surface thoroughly. Otherwise, the stain will not penetrate inside the porous structure of the wood.
You do not ALWAYS have to strip off old stains when staining a previously stained deck if you are applying the same stain type, color, and brand as the old one. Since deck stains penetrate deep into the wood, they prevent moisture buildup and protect your deck from mold UV rays and rot.
If I had to pick an ideal time, I would say spring or fall when the indoor temperature is most consistent with outdoor temperature and it's often easy to open the windows (after the work is complete) to help air out the smell faster. But, really, sanding and refinishing hardwood can take place any time of year.
Water Test
Pour a spoonful of water onto the floor. If it forms droplets that stay on the surface of the wood, the floor finish is still good. If the water is slowly absorbed into the wood, the finish is worn and needs to be restored.
How long do I have to wait to use my room after my floors are refinished? We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on. Allow 48 hours before setting furniture and returning pets.
The palm sander is definitely the most common tool for sanding a wooden floor by hand. Palm sanders also oscillate, however, unlike orbital random sanders, the pad of the palm sander is fixed straight.
The only way to refinish one room is to install a transition piece (or if there's one in place already). Therefore, it's best to refinish all your wood floors rather than one place such as the hallway or kitchen. If unsure, call a professional for a consultation.