Comb picks are used for opening a large number of low security locks, they work by pushing the pin stack above the shear line. This Comb Pick is designed for Master, Fortress and many 40mm and 50mm clone 4-pin solid body padlocks. Master 140 locks contain spool security pins and are easily opened with this comb pick.
Lock picking can be done on most door locks that use a physical key such as a mortice, Yale and a euro cylinder lock. However, key bumping is mostly reserved for a pin tumbler lock which is also known as a euro cylinder lock that are found in uPVC doors.
Comb picks are highly effective at bypassing a large number of lower security locks. Comb picks work by pushing the entire pin stack above the sheer line. YES, both the bottom and top pins go above the sheer line in the lock. Then just turn the Comb pick like a key.
Raking (or rake picking, scrubbing) is a style of lockpicking used to quickly open pin-tumbler and wafer locks. Raking is characterized by the pick being lightly brushed against the components, often with an up-down motion to simulate a wide variety of component positions.
The wafers nestle into a groove in the lower part of the outer cylinder (green) preventing the plug (yellow) from rotating. When the correct key is inserted, the wafers (red) are raised up out of the lower groove in the outer cylinder, but not so high that they enter the upper groove in that cylinder.
A comb pick is a lockpicking tool designed to pick pin-tumbler locks by moving all pin stacks completely above the shear line, leaving no obstructions to prevent rotation of the plug. Comb picks may either compress springs or forcibly remove poorly fastened chamber casings to allow springs and pins to be moved further.
A comb with a tapering tail or handle used in styling to lift, divide, or curl the hair. 'Using a rat tail comb gently create a series of hair loops that are pulled loose from the Twist. '
One of the most common (and easiest to pick) locks is the pin-and-tumbler, which is a type of cylinder lock. Cylinder locks are used in most deadbolts. When picking a pin-and-tumbler lock, put the tension wrench in the keyhole and turn it as if it was a key.
Most Master Locks are very easy to pick and are considered one of the easiest beginner locks when practicing lock picking. They have 4 standard pins and a wide-open keyway that can be quickly bypassed in many ways including picking them with improvised tools such as paperclips, bobby pins, or even a chicken bone.
When executed correctly, lock bumping is effective in nearly 90 percent of all cylinder-type locks produced today. Perhaps one of the most disconcerting aspects of lock bumping is that it can often go undetected, which means that your home can be broken into without any signs of forced entry.
The reality is that nearly every lock can be picked and if not picked, bypassed using some other method. The secret to security is having locks that are extremely difficult to pick and or bypassed.
Pick-resistant locks have an extra set of tumblers or locking apparatus so that, in effect, the key has to do two things at once. Because of their resistance to manipulation, these locks are also resistant to key bumping. One of the most popular pick-resistant locks is the Medeco.
The key distinction here is whether the lock is exposed or guarded. If it doesn't have guards around it for protection, the quickest method is to force it using a standard pipe wrench, with the help of a short cheater pipe. Simply get a solid bite on the hockey puck and force it downward, breaking the hasp eye.
Pin tumblers are most commonly employed in cylinder locks, but may also be found in tubular pin tumbler locks (also known as radial locks or ace locks).
These locks are widely used in applications such as doors, cabinets, game machines, elevators, bi-cycles, coin-operated devices (vending machines and washing machines), and padlocks. Major components of a pin tumbler lock include driver pins (top pins), key pins (bottom pins), plug, cylinder, springs, and a cam.
A slider is a wafer-like object used as a locking component in many locks. Sliders are primarily used in additional to traditional pins or wafers as secondary locking systems, such as with sidebars.
To do this, unfold the large edge of your paperclip twice until a straight portion juts out. You will be inserting the straight part into the lock to use as a pick. Some locksmiths also put a tiny upward bend into the tip of the pick. This is to depress the pins inside the lock but is not strictly necessary.
The "bumper" needs to bump the key hard enough to jar the pins, but not so much that the lock or key is damaged. Bumping the key causes the pins to jump slightly. Even this slight amount of motion is enough to allow the bump key to turn the cylinder, unlocking the lock.
Step 1 Make the Bump Key
Go to the any store that has blank keys. Wal-Mart and Home Depot have them. They look like this, without teeth at all: A bump key is made by using a triangular file (they're at every hardware store…