Baking soda and vinegar, when mixed together, can form a chemical reaction that looks sort of like an eruption. This chemical reaction can help clear your toilet and any pipe clogs that you might have.
Allow the baking soda and vinegar mixture to sit in the toilet bowl for about 30 minutes to overnight depending on the clog. This waiting period gives the solution enough time to work on softening and dislodging the clog. While you're waiting, carefully add hot water into the toilet bowl.
One of the strongest substances for unclogging a toilet is a commercial drain cleaner specifically designed for toilet clogs. These cleaners typically contain powerful chemicals that dissolve organic matter and stubborn blockages.
Add 1/2 cup baking soda directly into the toilet bowl water surrounding the blocked toilet. Slowly pour 1/2 cup of distilled white vinegar down the inside of the bowl to avoid splashes. Stand back as a fizzy foam reaction occurs, potentially breaking apart paper. Let it sit for 15 minutes, then flush it repeatedly.
Dissolve the paper in water.
Other household items you may add to the liquid solution include vinegar, boiling hot lemon juice, and even bleach, which does require caution. After soaking, the paper should become a wad of crumbled material as it dries.
Yes, a toilet can unclog itself over time, but it depends on what is causing the blockage. If the clog is made up of water-soluble materials, like toilet paper or fecal matter, then eventually they will begin dissolving if you give them enough time.
You need water, not air, pressure to loosen the clog. If your toilet lacks water, pour in enough water till the plunger is covered. Use a gentle plunge initially since a hard one will force air back around the seal, blowing water all over you and your bathroom floor.
If the blockage is a build-up of tissue paper, pour 3-4 cups of hot (not boiling) water from waist height into the toilet bowl. Give the hot water around 20 minutes to breakdown the blockage.
Letting a clogged toilet sit too long can result in more severe problems. Beyond the risk of overflow and water damage, the clog could also cause toilet water to back up into other parts of your plumbing system, affecting sinks, showers, and even your home's main sewer line.
A very good method of unclogging a toilet without the need for a plunger is to use dishwashing liquid, especially if the obstruction is only partially blocked or results from grease or organic waste.
One very low tech method to unclog a toilet is to use a white wine vinegar and baking soda solution, as the chemical reaction can help dissolve the waste. We will explore this and other techniques in a bit more detail shortly…
You can use straight or a diluted vinegar cleaning solution for the bathroom to clean bacteria, especially around the toilet. Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight.
This can help prevent clog-causing buildup on the interior surface of pipes. Or you can pour one cup of vinegar down the drain and let it sit for 30 minutes, followed by a rinse with two quarts of very hot water. Before putting dirty dishes, pots or pans in the dishwasher, scrape them well and rinse with cold water.
Pouring dish soap down a toilet will unclog many obstructions. Pour 1/2- to 1-cup of dish soap directly in the toilet water and wait about 30 minutes before flushing. Follow the dish soap with a gallon of hot water if dish soap alone does not work. What is the strongest thing to unclog a toilet?
Make your own drain cleaner by pouring one cup of baking soda and two cups of vinegar into the toilet and adding a half gallon of hot water. Dish soap can also help loosen some obstructions. When using either method, allow the solution to sit overnight and then flush the toilet to see if the obstruction has cleared.
One common question people ask is, “Can plunging make a clog worse?” The short answer is yes, but only if you're not using toilet plungers correctly. Using too much force or plunging too vigorously can push the clog further down the drain, making it harder to remove.
Check your water levels
Low water levels in your tank are common causes of toilets filling up with water when flushed. They can also cause slow-draining toilets. You can manually top up your tank with water to help the flush. Then, check the flush tube for cracks and bends that lead to leaks.
Additionally, letting a clogged toilet sit for a long time makes it more likely that more buildup, debris, and waste will accumulate around the blockage. That also leads to more serious clogs stubborn enough to require professional plumbing services.
You might be using the plunger wrong
If the water level is low, the plunger may not seal properly or achieve the suction it needs to be effective. Pour water into the toilet if you need to. Position the plunger directly over the drain opening and plunge slowly and gently a few times. This ensures you have a good seal.
DO NOT: Take the flush-and-a-prayer method of flushing again – and again - until the blockage breaks up. Chances are this could lead to overflow. DO: If water is already rising, lift the tank lid and carefully use the rubber floater to block water from filling the hole at the bottom.
Drano for toilets is a popular choice for many homeowners when dealing with stubborn clogs. This powerful product has been a trusted solution for many years, effectively breaking down and dislodging blockages that can cause significant inconvenience and potential damage in the bathroom.
Substances like toilet paper and fecal matter will eventually dissolve within the toilet drain and clear the clog organically. However, blockages made from insoluble materials won't resolve on their own and typically require you to fix the clog manually or contact a professional before they worsen.
Use Baking Soda To Unclog a Toilet – Something a little stronger than dish soap for dealing with a clogged toilet is a baking soda/vinegar combination. Pour 1 cup of baking soda and 2 cups of vinegar into your toilet. It will begin to fizz but this is okay. Let it sit for about 30 minutes and then try a test flush.