Also, use Wet & Forget Shower to clean shower doors, tubs, sinks, toilets, countertops, faucets, and shower curtains. You can use Wet and Forget Shower on all your shower and tub surfaces including: Acrylic.
Final Verdict. Our favorite, editor-approved toilet bowl cleaner is the Lysol Power Toilet Bowl Cleaner. It's an easy-to-find cleaner that works great on tough stains, has a clean scent, and lasts for a long time.
Then, immediately after, rinse surfaces with water. Wet & Forget Shower is safe on almost any sink surface except for natural marble. So use it on your acrylic, cultured marble, porcelain, or even your stainless steel sinks.
Thoroughly saturate the surface with Wet & Forget Outdoor. Then, allow the product to dry. Wet & Forget will work over time with the rain and wind to gently clean up the green and black stains.
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.
Vinegar and Baking Soda
Pour a cup of vinegar into the bowl, then mix it around with a toilet brush. Add a cup of baking soda to the coated areas and immediately follow up by adding another cup of vinegar. Wait about 10 minutes to allow the baking soda and vinegar to interact, creating that effective fizzing action.
Wet & Forget is highly corrosive, and can seriously harm your skin or eyes.
Spring. Apply Wet & Forget Outdoor as soon as the weather warms to remove unsightly stains and growth that have been hiding in winter. Spring rain showers work with the product to clean dirty outdoor surfaces for you – no rinsing or scrubbing required!
The main difference between Benzalkonium Chloride and Sodium Hypochlorite is on how fast they work. Benzalkonium Chloride in Wet and Forget has a long-term cleaning method, whereas the Sodium Hypochlorite in 30 Seconds Spray and Walk Away has a fast reaction for immediate results.
You'll come home to a clean fresh smelling bath. Also, use Wet & Forget Shower to clean shower doors, tubs, sinks, toilets, countertops, faucets, and shower curtains.
Do not spray Wet & Forget directly onto plants. Protect landscaping from overspray by rinsing with water before and after application or covering them during application. I applied Wet & Forget to a concrete surface & it turned an orange-brown color.
How long will Wet & Forget Outdoor take to work? It depends on the type of growth and the intensity of the contamination. If it's a new growth or a small amount of staining you can see results within days. Otherwise, it may take 2-3 months to see improvement.
Pour white vinegar into the bowl to cover the stained areas. Let the vinegar soak for 30 minutes to an hour. Scrub the stained areas with a toilet brush. If the stains persist, sprinkle baking soda on the remaining stains and let it sit for up to 10 minutes, then scrub again with the toilet brush.
While hard water stains are certainly difficult to remove, they are not permanent. There are several effective, non-toxic cleaners you can use to remove pesky hard water stains from your toilet bowl, including baking soda and vinegar, Bon Ami or Bar Keepers Friend, and borax.
Citric acid
Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight.
Wet & Forget Outdoor Timelines
In the case of green stains, rain should wash them away within a few weeks. So, an April application may be all you need for clean surfaces in May. Black stains can take up to a couple of months, though rainfall can speed up that process.
Lastly, the details: the active ingredient in Wet and Forget is alkyldimethylbenzyl ammonium chloride. Do YOU know what that is, how it works, what it's doing to our environment, or how quickly it degrades?
If your deck is older and black with contamination, wait a month after applying Wet & Forget and then give the area a light brush with a scrub brush and warm water. You will need to reapply Wet & Forget after this scrub but the good news is you should only have to do this once, and then the maintenance becomes easy.
P280 - Wear protective gloves, protective clothing & eye protection. GHS Precaution Phrases: P305+351+338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Hazard: The hose end nozzle clip can dislodge and allow the cleaning solution to spray on users, posing a risk of skin and eye irritation and other injuries.
Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush. Repeat if necessary.
Who knew that dishwasher tablets could help keep your toilet sparkling clean? Just drop a dishwasher tablet in toilet bowl and let it sit for 10-15 minutes. Then, use a toilet brush to scrub the bowl and flush it. The tablet will help to break down any stains or buildup in the bowl, leaving it fresh and clean.
Iron, manganese and sulfur make up a large percentage of the earth's crust. So, it's no surprise that as water flows through the earth, it collects a lot of these elements. Studies show that water with an iron concentration higher than 0.3 parts per million (ppm) or over 0.05 ppm of manganese can cause brown staining.