Whilst vinegar will not directly dissolve concrete itself, but it will degrade the cement that binds your concrete slabs or flags together. Extended exposure to vinegar will also cause any polish or sealant on your pavers to erode over time, leading to bleaching, stains and weathering.
To clean your pavers with vinegar, mix equal parts of water and vinegar in a bucket, let it sit on the pavers for an hour so that the vinegar has time to work, then scrub the surface with a brush or a sponge. Make sure you choose white vinegar for household cleaning, as other types of vinegar can stain.
Acidic cleaners: Harsh, acid-based cleaning products and stain removers can damage the seal and finish of your concrete pavers. Bleach: This alkaline solution may be effective for other household uses, but it can discolor concrete pavers that have been colored or stained.
Water and mild dish soap is a popular cleaning solution because it's easy to find at home and it won't damage brick, but it will tackle stains. The BIA recommends using hot water for surface cleaning with a detergent. White vinegar and water, another common household cleaner, can also be used on mildew.
Pour baking soda on the stained spot, then add a bit of warm water. You can add some detergent or white vinegar for a stronger vinegar solution. Let the mixture sit for at least 1 hour. Scrub the top of the pavers, with extra attention to the gaps between the stones or bricks.
Whilst vinegar will not directly dissolve concrete itself, but it will degrade the cement that binds your concrete slabs or flags together. Extended exposure to vinegar will also cause any polish or sealant on your pavers to erode over time, leading to bleaching, stains and weathering.
Mix equal parts vinegar and water and pour into a spray bottle. Spray on the bricks and let is sit for a few minutes. Use a sponge mop to clean the bricks. If the bricks are very dirty, use a nylon-bristled scrub brush and put some elbow grease into the scrubbing.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
The pressure washer in combination with a dirt cutter is an excellent option. This removes not only weeds and moss from the surface, but also from indentations. Keeping up with this type of cleaning means that there is less time for weeds to grow. It also helps to maintain the beauty of the paving stones' surface.
Baking soda is an amazing household cleaner, and it can work really well on your pavers too.
Similar to cleaning pavers with muriatic acid, avoid an intense concentration of bleach, as it can damage the pavers.
Remember that vinegar can only be used for a short time on finished surfaces. Not only does it kill algae, but it eats away at polished cement if you leave it on the cement for too long. Vinegar can be used for longer periods on unfinished cement to remove algae, and it serves as an excellent cleaning agent.
Wash patio slabs with white vinegar
This eco-friendly solution is made up of equal parts vinegar and water, which is then left to soak into the patio to correct any discolouration and also remove tough marks. You should first move all plants and furniture out of the way, then sweep the area to remove any moss.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Apply the Simple Green solution. Allow the product to soak for a minute or so on heavy soils and greasy spills. Scrub, if necessary. Scrubbing with a soft bristle brush or non-abrasive scrubbing pad provides agitation that will help to loosen soils and will ensure a thoroughly clean, residue free surface.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Depending on the material of the paver (non-coloured concrete is safe), CLR may be suitable. Always spot test in an inconspicuous area first. Make sure the pavers are not coloured, stamped, sealed or coated.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
WD-40 may remove paint stuck to brick if applied directly and in large quantities, allowing it to sit on the surface for a few hours.
If you don't have the supplies for the ammonia mixture, you can also use bleach or hydrogen peroxide to remove mold, mildew, and stains. Remove dirt and debris using the broom. Put on safety gear. Pour ½ cup of bleach or hydrogen peroxide in a spray bottle with 3 cups of water.
White vinegar spray is effective at removing milder stains so that you can freshen up your bathroom or kitchen tiles and give your grout a good clean. You can also try mixing white vinegar with bicarbonate of soda to create a paste that will remove tougher layers of grime.