While snaking is generally considered safe for your pipes, it can damage your pipes if they are in bad shape. Homes that have older pipes are more susceptible to this happening as hairline cracks and corrosion occur over time. Surprisingly, snaking your main line can potentially make the clog worse.
If your auger isn't unclogging a clog, it could be because: The old clog is still attached. Are you using a drain snake that has been used before? Make sure the old clog isn't embedded in the corkscrew end.
Amateurs will mistakenly apply way too much force. The damage to the protective zinc can lead to significant rusting and cracking, which may lead to serious flooding in the future. The drain snake can break off pieces of metal that can add more damage. Flooding can result if pipes break during snaking.
Damaged Pipes — If your home's drainage system is older and made of galvanized materials, there is a very real chance the steelhead of the plumbing snake can scratch the inside of the pipe. Over time, that scratch will rust and weaken the structure of the pipe, until it bursts from the pressure.
A hand crank enables a flexible cable to descend into your toilet and break up an obstruction. While billed as devices that are easy to use by anyone and everyone, drain snakes can be hard to manage, and if used improperly, can damage pipes.
It would be best if you used the plunger on the toilet drain or a sink. First, ensure the plunger seals the drain completely, and then apply the plunger. This allows pressure from the plunger to remove the clog. You'll soon notice the reduced trapped water in the sink or toilet.
Do you need a plumber to snake a drain? For more minor clogs, you can snake your own drain. However, for heavy-duty clogs or to reach a clog far into your home's plumbing system, you'll need a power auger. A trained plumber best uses this type of tool as untrained individuals can cause pipe damage.
If the bottom of the pipe or fittings are missing this can cause the snake to catch and break the pipe. It can also cause the equipment to get stuck. Broken PVC pipe is another issue with drains. If PVC is installed correctly there is usually no issues.
When you have a clogged drain you might be tempted to fix the problem yourself before calling a professional. Improperly unclogging a pipe can cause damage, make the clog worse, or be potentially dangerous.
Drain Snake vs Drano
As far as home solutions, the snake is your strongest drain unblocker. It can be very helpful to keep a plumber's auger or snake in the house. You have to be a bit more careful with snakes than you would be with a chemical cleaner, however.
Unfortunately, the pressure from a plunger probably won't break up a shower drain clog. Instead, it will only send the material deeper down the drain pipe completely intact. The clog still exists, but now it's even deeper into your plumbing system, causing your shower to drain slowly or not drain at all.
Both methods have different uses and are designed to cater to different plumbing needs. Snakes are best to clear out small clogs like when there is mineral built up or hair is clogged in the sink. Hydro jets are best for clearing out pipes and any sort of clogged drains.
Pour one cup of fresh baking soda down the drain, followed by one cup of white vinegar. Place a rubber stopper or other sink hole cover over the drain opening. Wait 15 minutes to allow the vinegar and baking soda to unclog your drain, Then take out the drain cover and run hot tap water down the drain to clear the clog.
Clogged kitchen sinks are the worst. Just watching that dirty water sitting there is enough to throw up your hands and avoid the kitchen, hoping the problem will fix itself (it won't).
Check the vent
If the vent is blocked, it can cause water to drain slowly. You can check the vent outside your house to make sure it's not blocked by leaves or other debris. If you have access to the attic or crawl space, you can also check the vent system there to see if there are any blockages.
While snaking is generally considered safe for your pipes, it can damage your pipes if they are in bad shape. Homes that have older pipes are more susceptible to this happening as hairline cracks and corrosion occur over time. Surprisingly, snaking your main line can potentially make the clog worse.
Insert the snake's head into either the drain (if you didn't remove the trap) or the access point on the wall. Avoid running hot water while you snake, and use cold water instead. If the pipe is severely clogged, it will only trap this hot water in the pipes and damage them.
First of all, a drain snake is a good item to keep handy in a home. A basic hand-crank drain snake (a.k.a. a drain auger) is a much better option for getting rid of a minor clog than resorting to chemical drain cleaners. In fact, you should never use these chemicals on your drains!
First the drain snake loosens the clog—then the powerful Drano® gel clears it away! The 23-inch flexible tool bends safely through your pipes, and the Drano® Pro Concentrate Gel powers through the clog.
Professional Plumbing Tools 101: Drain Augers
Also known as drain snakes, there are several different versions of drain augers that most plumbers will carry with them at all times. In essence, it's a basic tool, but an auger is best for tough drain clogs that just won't budge and for cleaning out drains, too.
Annually. Even if you don't notice any specific signs that your drains are having trouble with clogs, you should do your best to have them cleaned at least once every year.
It is not a great drain clog remover. Bleach has no effect in dissolving the common culprits of household drain clogs, like hair, food scraps and grease.
Crank the Handle of the Drain Snake
When pushing the cable through the P-trap, the U-shaped pipe section under the sink, you may encounter some friction and resistance. If this happens, push on the cable while cranking the drain snake slowly. A couple of turns will help the cable maneuver through the bends in the pipe.